连续平压热压机柔性进入端结构特征与生产工艺特征分析

张红建; 岳群飞; 陈德旺; 瞿国富; 余文霞; 盛振湘

doi:10.19455/j.mcgy.20170204

“人造板连续平压和精准控制技术”专栏 | 浏览量 : 0 下载量: 68 CSCD: 0

PDF
导出
分享
收藏
专辑

连续平压热压机柔性进入端结构特征与生产工艺特征分析
Flexible Infeed Structural Characteristics of Continuous Press and Panel Manufacturing Technology
1. 中国福马机械集团有限公司
2017年31卷第2期页码：19-23
DOI： 10.19455/j.mcgy.20170204

扫描看全文

[1]张红建,岳群飞,陈德旺,瞿国富,余文霞,盛振湘.连续平压热压机柔性进入端结构特征与生产工艺特征分析[J].木材工业,2017,31(02):19-23.

ZHANG Hong-jian, YUE Qun-fei, CHEN De-wang, et al. Flexible Infeed Structural Characteristics of Continuous Press and Panel Manufacturing Technology[J]. China Wood Industry, 2017,31(2):19-23.
[1]张红建,岳群飞,陈德旺,瞿国富,余文霞,盛振湘.连续平压热压机柔性进入端结构特征与生产工艺特征分析[J].木材工业,2017,31(02):19-23. DOI： 10.19455/j.mcgy.20170204.

ZHANG Hong-jian, YUE Qun-fei, CHEN De-wang, et al. Flexible Infeed Structural Characteristics of Continuous Press and Panel Manufacturing Technology[J]. China Wood Industry, 2017,31(2):19-23. DOI： 10.19455/j.mcgy.20170204.

摘要

针对中国福马连续平压机柔性进入端的的技术结构特征,如排气长度、入口开度、板坯夹持位置、框架间距及热压板开度、液压及压力系统模式、钢带工作夹角、柔性条件等,分析其与制板工艺因素,如板坯结构、预固化层厚度、表层密度峰值、板厚适应范围等之间的关系,为连续平压机的设计及使用提出理论依据。

Abstract

The authors developed a flexible infeed for a China Foma continuous press used for wood-based panel manufacturing.The relationship between the structural characteristics and manufacturing technologies were analyzed for reference in designing a continuous press.Infeed structural characteristics included:discharge length, entry opening, holding position, frame distance, hot-platen opening, pressure system mode, working angle of double steel-belt and flexible conditions.Manufacturing technologies included:mat structure, pre-curing thickness, peak density and panel thickness.

关键词

连续平压机压机进入端入口开度板坯夹持位置框架间距密度峰值

Keywords

continuous presspress infeedentry openingholding positionframe distancepeak density

references

文章被引用时，请邮件提醒。

提交

暂无数据