利用废单板制造刨花板的关键技术及设备

郭东升; 吕爱东

doi:10.19455/j.mcgy.2013.01.011

讨论与建议 | 浏览量 : 0 下载量: 95 CSCD: 1

PDF
导出
分享
收藏
专辑

利用废单板制造刨花板的关键技术及设备
Key Techniques and Equipment for Making Particleboard with Waste Veneer
1. 北京泛欧瑞得科技有限公司
2013年27卷第1期页码：32-34
DOI： 10.19455/j.mcgy.2013.01.011

扫描看全文

[1]郭东升,吕爱东.利用废单板制造刨花板的关键技术及设备[J].木材工业,2013,27(01):32-34.

GUO Dong-sheng, LV Ai-dong. Key Techniques and Equipment for Making Particleboard with Waste Veneer[J]. China Wood Industry, 2013,27(1):32-34.
[1]郭东升,吕爱东.利用废单板制造刨花板的关键技术及设备[J].木材工业,2013,27(01):32-34. DOI： 10.19455/j.mcgy.2013.01.011.

GUO Dong-sheng, LV Ai-dong. Key Techniques and Equipment for Making Particleboard with Waste Veneer[J]. China Wood Industry, 2013,27(1):32-34. DOI： 10.19455/j.mcgy.2013.01.011.

摘要

为充分高效利用木材资源,提升刨花板产品质量及降低产品成本,着重介绍利用废单板制造刨花板在原料制备和施胶工段的关键技术及其工作原理。通过采用适用的原料制备工艺及施胶系统,板材的剖面密度分布显著改善,耗胶量减少,板材性能满足相关标准的要求。

Abstract

The authors developed techniques for manufacturing particleboard with waste veneer to take full advantage of wood residuals,improve the quality of particleboard（PB） products and reduce cost.Special particle preparation and resin blending processes were fully described.PB produced with waste veneer showed considerable improvement in the vertical density distribution.The authors believed that the new manufacturing technique using particleboard with waste veneer could save 15% resin usage without reducing particleboard performance.

关键词

废单板刨花板原料制备高压施胶系统

Keywords

waste veneerparticleboard（PB）particle preparationhigh pressure resin regulating system

references

文章被引用时，请邮件提醒。

提交

暂无数据