热压工艺及板坯含水率对竹帘胶合板性能的影响

高黎; 王正; 任一萍

doi:10.19455/j.mcgy.2012.06.003

研究与开发 | 浏览量 : 0 下载量: 143 CSCD: 10

PDF
导出
分享
收藏
专辑

热压工艺及板坯含水率对竹帘胶合板性能的影响
Influence of Hot Pressing Method and Mat Moisture Content on Properties of Bamboo Plywood
1. 中国林科院木材工业研究所
2. 国家林业局木材科学与技术重点实验室
3. 中国林科院林业新技术研究所
2012年26卷第6期页码：9-12
DOI： 10.19455/j.mcgy.2012.06.003

扫描看全文

[1]高黎,王正,任一萍.热压工艺及板坯含水率对竹帘胶合板性能的影响[J].木材工业,2012,26(06):9-12.

GAO Li1, WANG Zheng1, REN Yi-ping1. Influence of Hot Pressing Method and Mat Moisture Content on Properties of Bamboo Plywood[J]. China Wood Industry, 2012,26(6):9-12.
[1]高黎,王正,任一萍.热压工艺及板坯含水率对竹帘胶合板性能的影响[J].木材工业,2012,26(06):9-12. DOI： 10.19455/j.mcgy.2012.06.003.

GAO Li1, WANG Zheng1, REN Yi-ping1. Influence of Hot Pressing Method and Mat Moisture Content on Properties of Bamboo Plywood[J]. China Wood Industry, 2012,26(6):9-12. DOI： 10.19455/j.mcgy.2012.06.003.

摘要

以梁山慈竹为研究对象,对含水率不同的板坯,采用一段式"热上-冷下"和梯度降压式"热上-热下"两种热压工艺制备竹帘胶合板,分析板坯含水率和热压工艺对板材性能的影响。结果表明:热压工艺对板面平整度有显著影响,"热上-冷下"工艺条件下板面的平整度较优;板坯含水率在10%～20%范围,对板材的吸水厚度膨胀率、弹性模量、水煮内结合强度和板面平整度有显著影响,含水率15%时板材的各项性能较佳。

Abstract

Bamboo plywood was produced under different hot pressing parameters and mat moisture contents,and their properties were evaluated.The results showed that the hot pressing process,with cooling at the end of the pressing cycle,had significant influence on board surface flatness.Mat moisture content also had great effect on board thickness swelling,bending stiffness,boiled internal bonding strength,and panel flatness.The results showed that the optimal mat moisture content was around 15%.