新版国标强化木地板吸水厚度膨胀率的检测解析

王红强; 谢力生; 海凌超

doi:10.19455/j.mcgy.2009.05.010

讨论与建议 | 浏览量 : 0 下载量: 109 CSCD: 8

PDF
导出
分享
收藏
专辑

新版国标强化木地板吸水厚度膨胀率的检测解析
Discussion on the National Standard Testing Methods Used to Determine Thickness Swelling for Laminate Flooring Products
1. 国家家具产品质量监督检验中心,广东
2. 中南林业科技大学
2009年23卷第5期页码：34-36
DOI： 10.19455/j.mcgy.2009.05.010

扫描看全文

[1]王红强,谢力生,海凌超.新版国标强化木地板吸水厚度膨胀率的检测解析[J].木材工业,2009,23(05):34-36.

WANG Hong-qiang1, XIE Li-sheng2, HAI Ling-chao1. Discussion on the National Standard Testing Methods Used to Determine Thickness Swelling for Laminate Flooring Products[J]. China Wood Industry, 2009,23(5):34-36.
[1]王红强,谢力生,海凌超.新版国标强化木地板吸水厚度膨胀率的检测解析[J].木材工业,2009,23(05):34-36. DOI： 10.19455/j.mcgy.2009.05.010.

WANG Hong-qiang1, XIE Li-sheng2, HAI Ling-chao1. Discussion on the National Standard Testing Methods Used to Determine Thickness Swelling for Laminate Flooring Products[J]. China Wood Industry, 2009,23(5):34-36. DOI： 10.19455/j.mcgy.2009.05.010.

摘要

现行GB/T 18102-2007《浸渍纸层压木质地板》和2000年执行的旧标准中,吸水厚度膨胀率测试方法有较大差异。笔者分别按照两个标准中的测试方法,对相同的强化木地板进行测试。结果显示:满足旧标准要求的合格产品,并不一定能满足现行标准的要求;要满足现行标准的要求,应进一步提高强化木地板的质量。

Abstract

The current standard for laminate flooring products,GB/T 18102-2007,has replaced previous standard,GB/T 18102-2000.There are some differences in determining thickness swelling between the two standards.The authors evaluated the differences by testing samples cut from the same board using the two different standards.The results showed that the thickness swelling of the samples met the requirement of previous national standard,but did not reach the specification of the current standard.The authors explained the difference between the two methods and requested the laminate flooring manufacturers to adapt the new standard.