软木/龙须草纤维复合材料的研究

雷亚芳; 周伟; 刘艳贞

doi:10.19455/j.mcgy.2009.03.003

研究与开发 | 浏览量 : 0 下载量: 158 CSCD: 6

PDF
导出
分享
收藏
专辑

软木/龙须草纤维复合材料的研究
Development of Cork and Eulaliopsis binata Fiber Composite
1. 西北农林科技大学机电学院
2. 大兴安岭地区林产工业处
3. 大兴安岭职业学院
2009年23卷第3期页码：9-12
DOI： 10.19455/j.mcgy.2009.03.003

扫描看全文

[1]雷亚芳,周伟,刘艳贞.软木/龙须草纤维复合材料的研究[J].木材工业,2009,23(03):9-12.

LEI Ya-fang1, ZHOU Wei2, LIU Yan-zhen3. Development of Cork and Eulaliopsis binata Fiber Composite[J]. China Wood Industry, 2009,23(3):9-12.
[1]雷亚芳,周伟,刘艳贞.软木/龙须草纤维复合材料的研究[J].木材工业,2009,23(03):9-12. DOI： 10.19455/j.mcgy.2009.03.003.

LEI Ya-fang1, ZHOU Wei2, LIU Yan-zhen3. Development of Cork and Eulaliopsis binata Fiber Composite[J]. China Wood Industry, 2009,23(3):9-12. DOI： 10.19455/j.mcgy.2009.03.003.

摘要

为了降低软木材料的生产成本,将龙须草纤维和软木粒子混合,进行了软木/龙须草纤维复合材料的开发研究。以复合材料的耐水性、抗拉强度、可压缩系数、回弹率等为指标,考察了龙须草纤维的比例、施胶量、热压温度和热压时间的影响。得出较佳的工艺条件为:龙须草纤维比例20%,施胶量8%,热压温度150℃,热压时间15 min。

Abstract

To reduce the cost of cork-based panels,lower cost Eulaliopsis binata fiber was used as a substitute and mixed with cork to make low density cork and Eulaliopsis binata fiber composite.The effects of four selected processing parameters（ratio of Eulaliopsis binata fibers,glue content,pressing temperature,and pressing time） on water resistance,tensile strength,condensability,and rebound elasticity were evaluated.The result showed that the optimized parameters included 20% fiber ratio,8% glue content,150 ℃ pressing temperature,and 15 minute pressing time.