表面粗糙度对水性涂料漆膜质量的影响

路则光; 申利明; 陈秀兰

doi:10.19455/j.mcgy.2007.03.014

应用技术 | 浏览量 : 0 下载量: 308 CSCD: 12

PDF
导出
分享
收藏
专辑

表面粗糙度对水性涂料漆膜质量的影响
Effect of Surface Roughness of Veneer Overlaid Panel on Quality of Water-borne Sealer Coating
1. 南京林业大学木材工业学院
2. 南京林业大学木材工业学院,南京,210037
2007年第3期页码：42-44
DOI： 10.19455/j.mcgy.2007.03.014

扫描看全文

[1]路则光,申利明,陈秀兰.表面粗糙度对水性涂料漆膜质量的影响[J].木材工业,2007(03):42-44.

LU Ze-guang, SHEN Li-ming, CHEN Xiu-lan. Effect of Surface Roughness of Veneer Overlaid Panel on Quality of Water-borne Sealer Coating[J]. China Wood Industry, 2007,(3):42-44.
[1]路则光,申利明,陈秀兰.表面粗糙度对水性涂料漆膜质量的影响[J].木材工业,2007(03):42-44. DOI： 10.19455/j.mcgy.2007.03.014.

LU Ze-guang, SHEN Li-ming, CHEN Xiu-lan. Effect of Surface Roughness of Veneer Overlaid Panel on Quality of Water-borne Sealer Coating[J]. China Wood Industry, 2007,(3):42-44. DOI： 10.19455/j.mcgy.2007.03.014.

摘要

对经过砂磨的黑槭薄木贴面家具板件的表面粗糙度进行测量后,喷涂2遍水性涂料,测试其漆膜厚度和附着力、耐水性及硬度。结果表明:表面粗糙度（Ra）对漆膜附着力影响显著,对耐水性、硬度的影响不显著。Ra为5.20um时,漆膜剥落率最小,附着力最大,耐水性最好,硬度适中,具有较佳的漆膜质量。

Abstract

Maple veneer overlaid furniture panels were first tested for surface roughness and then they were sprayed twice with a water-borne coating.Then the relation between surface roughness of the furniture panels and quality of the coating films was analyzed by measuring the cured coating for the indexes of thickness,adhesion,water resistance and hardness.The results indicated that surface roughness（Ra） had a dramatic influence on the coating adhesion,while it had little affect on the water resistance and hardness.When Ra was 5.20 um,the coating film had lowest peel value,moderate harness,but highest adhesion strength and best water resistance.

关键词

表面粗糙度水性封闭底漆漆膜质量

Keywords

references

文章被引用时，请邮件提醒。

提交

暂无数据