混炼工艺参数对木/塑复合材料性能的影响

许民; 王清文; 宋永明; 彭广亮

doi:10.19455/j.mcgy.2006.03.003

浏览量 : 0 下载量: 292 CSCD: 11

PDF
导出
分享
收藏
专辑

混炼工艺参数对木/塑复合材料性能的影响
Effects of Milling Parameter on the Properties of Wood-Plastic Composite
1. 东北林业大学教育部生物质材料科学与技术重点实验室
2. 东北林业大学教育部生物质材料科学与技术重点实验室,哈尔滨,150040
2006年第3期页码：7-9
DOI： 10.19455/j.mcgy.2006.03.003

扫描看全文

[1]许民,王清文,宋永明,彭广亮.混炼工艺参数对木/塑复合材料性能的影响[J].木材工业,2006(03):7-9.

XU Min, WANG Qing-wen, SONG Yong-ming, et al. Effects of Milling Parameter on the Properties of Wood-Plastic Composite[J]. China Wood Industry, 2006,(3):7-9.
[1]许民,王清文,宋永明,彭广亮.混炼工艺参数对木/塑复合材料性能的影响[J].木材工业,2006(03):7-9. DOI： 10.19455/j.mcgy.2006.03.003.

XU Min, WANG Qing-wen, SONG Yong-ming, et al. Effects of Milling Parameter on the Properties of Wood-Plastic Composite[J]. China Wood Industry, 2006,(3):7-9. DOI： 10.19455/j.mcgy.2006.03.003.

摘要

通过混炼工艺进行复合材料配方试验,研究木/塑混和比、偶联剂种类和加入比例以及混炼时间等工艺参数对复合材料性能的影响。结果表明:加入偶联剂可使材料的主要强度指标增加;混炼时间对材料性能影响不显著。

Abstract

This paper studied the formula of a wood/plastic composite as affected by a milling process.The ratio of coupling agent added, wood to plastic,and MAPP to peroxide diisopropylene benzene,and milling time were discussed as main factors.The results showed that:1) mechanical properties of a WPC were improved by adding MAPP and they dropped to the lowest value at a wood/plastic ratio of 5∶5;2) when the ratio of MAPP to peroxide diisopropylene benzene was 1∶（0.075,1,.0）,the comprehensive properties of a WPC was acceptable;and 3) the effect of milling time on WPC properties was not significant.