白桦枝桠材制造刨花板的优化工艺

李凯夫

doi:10.19455/j.mcgy.2000.05.002

浏览量 : 0 下载量: 45 CSCD: 5

PDF
导出
分享
收藏
专辑

白桦枝桠材制造刨花板的优化工艺
Optimization of Manufacturing Technology for Particleboard Made by White Birch Branch Material
1. 华南农业大学林学院,广州,510642
2000年第5期页码：6-9
DOI： 10.19455/j.mcgy.2000.05.002

扫描看全文

[1]李凯夫.白桦枝桠材制造刨花板的优化工艺[J].木材工业,2000(05):6-9.

LI Kai fu. Optimization of Manufacturing Technology for Particleboard Made by White Birch Branch Material[J]. China Wood Industry, 2000,(5):6-9.
[1]李凯夫.白桦枝桠材制造刨花板的优化工艺[J].木材工业,2000(05):6-9. DOI： 10.19455/j.mcgy.2000.05.002.

LI Kai fu. Optimization of Manufacturing Technology for Particleboard Made by White Birch Branch Material[J]. China Wood Industry, 2000,(5):6-9. DOI： 10.19455/j.mcgy.2000.05.002.

摘要

以白桦枝桠材为原料 ,在测定材质的基础上对制板工艺进行研究 ,提出了制板的优化工艺参数。利用白桦枝桠材制造优质刨花板 ,将为枝桠材的有效利用开辟新途径

Abstract

The White Birch (Betula platyphylla ) branch material, of which 33 % are above 3 cm in diameter, and accounting for 47% of the tree trunk, is a potential resource for particleboard manu facture. In this paper, the properties of both White Birch branch material and the board have been investigated. Based on the experiment, a set of optimized manufacturing technology parameters for White Birch branch particleboard have been put forward.