1.中国林科院木材工业研究所，北京 100091
2.南京林业大学林业资源高效加工利用协同创新中心，江苏南京 210037
3.大兴安岭神州北极木业有限公司，黑龙江漠河 165100
扫 描 看 全 文
陈旭,王玉荣,龚迎春等.我国胶合木制备及增强技术研究进展[J].木材科学与技术,2022,36(06):24-31.
CHEN Xu,WANAG Yu-rong,GONG Ying-chun,et al.Research Status of Manufacture and Reinforcement Technology of Glued Laminated Timber in China[J].Chinese Journal of Wood Science and Technology,2022,36(06):24-31.
胶合木是我国梁柱式、井干式木结构建筑的主要材料。介绍我国胶合木应用现状，分析层板分等、指接工艺和胶合工艺对层板及胶合木力学性能的影响，阐述各主体制备工艺目前存在的问题及发展趋势。在此基础上，分析胶合木梁抗弯承载性能和破坏模式，探讨布状、棒状和板状增强方式对胶合木的增强机制，总结各种增强方式的作用效果和不足，为胶合木的进一步研究提出建议。
Glued laminated timber(GLT)is a main material for beam-column timber structures and log houses in China. In this paper, the current status of GLT industry in China was elaborated. The effects of the key manufacturing process of GLT including the laminate grading, finger-joining process, and gluing process on the mechanical properties of GLT were analyzed. The existing challenges and developing trends of the main manufacturing processes were described. Based on the practical situation, the bending properties and failure modes of GLT were analyzed, and the reinforcement mechanisms of cloth-like, rod-like, and plate-like reinforcement on the GLT were discussed. The benefits and deficiencies of the reinforcement technologies were summarized.
胶合木制造工艺抗弯性能增强技术
glued laminated timber (GLT)manufacturing processbending propertiesreinforcement technology
朱建伟. 胶合木结构建筑的发展现状及前景[J]. 现代农业研究, 2021, 27(8): 137-138.
ZHU J W. Present situation and prospect of the construction of glued wood structure[J]. Modern Agriculture Research, 2021, 27(8): 137-138.
陈暑冰, 佟晓超, 赵捷, 等.胶合木生产质量控制关键点分析[J]. 建筑技术, 2022, 53(3): 270-272.
CHEN S B, TONG X C, ZHAO J, et al. Analysis on key points of production quality control of glued wood[J].Architecture Technology,2022, 53(3): 270-272.
中国建研院认证中心颁发首张CABR胶合木产品质量认证证书[J].建设科技, 2021(20): 6-7.
The first CABR plywood product quality certificate issued by the certification center of China Construction Research Institute[J].Construction Science and Technology, 2021(20): 6-7.
Johnson J W , Kunesh R H . Tensile Strength of Special Douglas-Fir and Hem-Fir 2-Inch Dimension Lumber[J]. Wood & Fiber, 1975, 4:305-318.
Samson M. Method for assessing the effect of knots in the conversion of logs into structural lumber[J]. Wood and Fiber Science, 2007, 25: 298-304.
XU P. Estimating the influence of knots on the local longitudinal stiffness in radiata pine structural timber[J]. Wood Science and Technology, 2002, 36(6): 501-509.
郭伟, 任海青, 殷亚方, 等. 北美规格材目测分等概述[J]. 世界林业研究, 2007, 20(5): 57-62.
GUO W, REN H Q, YIN Y F, et al. Summary of visual grading on structural lumber in North America[J]. World Forestry Research, 2007, 20(5): 57-62.
龙超, 吕建雄, 任海青, 等. 中国与加拿大规格材目测分等规则的比较[J]. 木材工业, 2008, 22(4): 23-25.
LONG C, LU J X, REN H Q, et al. Comparison between the Chinese and Canadian visual grading rules for dimensional lumber[J]. China Wood Industry, 2008, 22(4): 23-25.
江京辉, 吕建雄, 任海青, 等. 不同标准体系中结构用规格材目测分级规则的比较[J]. 南京林业大学学报(自然科学版), 2009, 33(6): 25-29.
JIANG J H, LYU J J, REN H Q, et al. Comparison of visual grading rules for structural lumber in different standards[J]. Journal of Nanjing Forestry University (Natural Sciences Edition), 2009, 33(6): 25-29.
娄万里, 任海青, 江京辉, 等. 落叶松规格材目测分等的研究[J]. 木材工业, 2010, 24(2): 1-4.
LOU W L, REN H Q, JIANG J H, et al. Effects of major defects on dimensional larch lumber visual grading[J]. China Wood Industry, 2010, 24(2): 1-4.
郭伟, 任海青, 费本华, 等. 杉木人工林3个目测等级规格材的力学性质[J]. 林业科学, 2011, 47(11): 139-143.
GUO W, REN H Q, FEI B H, et al. Mechanical properties of three grades of Chinese fir dimension lumber[J]. Scientia Silvae Sinicae, 2011, 47(11): 139-143.
任海青, 郭伟, 殷亚方. 北美规格材机械分等综述[J]. 世界林业研究, 2006, 19(3): 66-70.
REN H Q, GUO W, YIN Y F. Machine grading of lumber in North America[J]. World Forestry Research, 2006, 19(3): 66-70.
江京辉, 吕建雄, 任海青, 等. 3种无损检测技术评估足尺规格材的静态弹性模量[J]. 浙江林学院学报, 2008, 25(3): 277-281.
JIANG J H, LU J X, REN H Q, et al. Evaluation of modulus of elasticity for dimension lumber by three nondestructive techniques[J]. Journal of Zhejiang Forestry College, 2008, 25(3): 277-281.
江京辉, 吕建雄, 任海青, 等. 动态弹性模量用于评估不同等级规格材的研究[J]. 南京林业大学学报(自然科学版), 2008, 32(2): 63-66.
JIANG J H, LYU J X, REN H Q, et al. Assessment of different grade dimension lumber by dynamic modulus of elasticity[J]. Journal of Nanjing Forestry University (Natural Sciences Edition), 2008, 32(2): 63-66.
周海宾, 任海青, 吕建雄, 等. 分等方法对我国人工林杉木规格材等级的影响[J]. 建筑材料学报, 2009, 12(3): 296-301.
ZHOU H B, REN H Q, LYU J X, et al. Effects of grading methods on dimension lumber grades for Chinese fir plantation[J]. Journal of Building Materials, 2009, 12(3): 296-301.
王朝晖, 任海青, 骆秀琴, 等. 落叶松规格材机械应力分等方法的研究[J]. 木材工业, 2009, 23(3): 1-4.
WANG Z H, REN H Q, LUO X Q, et al. Mechanical stress grading of larch dimension lumber from northeastern China[J]. China Wood Industry, 2009, 23(3): 1-4.
任海青, 郭伟, 费本华, 等. 轻型木结构房屋用杉木规格材机械应力分等研究[J]. 建筑材料学报, 2010, 13(3): 363-366.
REN H Q, GUO W, FEI B H, et al. Mechanical stress grading of Chinese fir dimension lumber for light wood structure houses[J]. Journal of Building Materials, 2010, 13(3): 363-366.
娄万里, 任海青, 王朝晖, 等. 落叶松结构用规格材的机械分级研究[J]. 中南林业科技大学学报, 2011, 31(7): 29-32.
LOU W L, REN H Q, WANG Z H, et al. Mechanical grading of larch structural dimension lumber[J]. Journal of Central South University of Forestry ＆ Technology, 2011, 31(7): 29-32.
Kretschmann D E, Green D W. Mechanical grading of oak timbers[J]. Journal of Materials in Civil Engineering, 1999, 11(2): 91-97.
堀江秀夫, 合田久敬. 构造用指接集成材的强度性能[J]. 林产试研报, 1986(75): 45-47.
Horie H, Kurata H. Strength properties of structural finger-jointed lumber[J]. Report of the Hokkaido Forest Products Research Institute, 1986(75): 45-47.
叶琦, 管成, 张厚江, 等. 辐射松层板抗弯性能的指接参数优化及无损检测研究[J]. 北京林业大学学报, 2022, 44(3): 148-160.
YE Q, GUAN C, ZHANG H J, et al. Optimization of finger joint parameters and nondestructive testing of bending properties of radiata pine laminates[J]. Journal of Beijing Forestry University, 2022, 44(3): 148-160.
林兰英, 傅峰. 人工林桉树木材指接工艺研究[J]. 木材加工机械, 2007, 18(1): 10-15.
LIN L Y, FU F. Study on the finger-joint technology for Eucalyptus plantation[J]. Wood Processing Machinery, 2007, 18(1): 10-15.
Özçifçi A, Yapıcı F. Structural performance of the finger-jointed strength of some wood species with different joint configurations[J]. Construction and Building Materials, 2008, 22(7): 1543-1550.
李海栋, 王朝晖, 黄仲华, 等. 落叶松结构用胶合木层板指接工艺参数对力学性能的影响[J]. 林产工业, 2014, 41(1): 13-18.
LI H D, WANG Z H, HUANG Z H, et al. Effects of finger-jointing parameters on mechanical properties of dahurian larch laminate for structural glulam[J]. China Forest Products Industry, 2014, 41(1): 13-18.
黄仲华, 王朝晖, 李海栋. 结构用落叶松材指接工艺试验研究[J]. 木材加工机械, 2012, 23(2): 21-25.
HUANG Z H, WANG Z H, LI H D. Research of manufacture process for Larix gmelini finger-joint structural timber[J]. Wood Processing Machinery, 2012, 23(2): 21-25.
周海宾, 孙华林, 张俊珍, 等. 结构用胶合木性能若干影响因素[J]. 建筑材料学报, 2014, 17(3): 553-558.
ZHOU H B, SUN H L, ZHANG J Z, et al. Factors influencing strength properties of structural glulam[J]. Journal of Building Materials, 2014, 17(3): 553-558.
孙健, 傅峰. 人工林杉木胶合工艺优化研究[J]. 木材加工机械, 2011, 22(3): 28-31, 41.
SUN J, FU F. Study on optimizing for methods of gluing of Chinese Fir wood[J]. Wood Processing Machinery, 2011, 22(3): 28-31, 41.
赵立, 申士杰, 李杰. 不同胶黏剂不同树种结构用集成材胶合性能的研究[J]. 林产工业, 2015, 42(11): 39-42, 45.
ZHAO L, SHEN S J, LI J. Study on gluing property to structural glulam with different types of adhesive and timber[J]. China Forest Products Industry, 2015, 42(11): 39-42, 45.
胡南, 李贤军, 谢力生, 等. 工程胶合木胶合成型工艺优化研究[J]. 中南林业科技大学学报, 2016, 36(1): 142-145.
HU N, LI X J, XIE L S, et al. Study on optimized gluing and forming process for Larix gmelini engineering glued laminated timber[J]. Journal of Central South University of Forestry ＆ Technology, 2016, 36(1): 142-145.
周淑容, 冯蜀逸, 熊刚, 等. 现代胶合木梁弯曲性能试验研究[J]. 建筑技术, 2020, 51(3): 307-310.
ZHOU S R, FENG S Y, XIONG G, et al. Experimental study on flexural behavior of glulam beams[J]. Architecture Technology, 2020, 51(3): 307-310.
刘建萍. 胶合木胶合质量影响因素浅析[J]. 木材工业, 1998, 12(6): 28-30.
LIU J P. Factors affecting bonding strength of glued lumber[J]. China Wood Industry, 1998, 12(6): 28-30.
王解军, 刘艳格, 宁凡. 胶缝缺陷对木梁承载能力的影响[J]. 公路工程, 2018, 43(6): 22-25, 121.
WANG J J, LIU Y G, NING F. The influence of glue line defects on bearing capacity of glulam beam[J]. Highway Engineering, 2018, 43(6): 22-25, 121.
王解军, 刘艳格, 宁凡. 胶缝缺陷对木梁抗弯刚度影响研究[J]. 公路工程, 2018, 43(4): 77-80.
WANG J J, LIU Y G, NING F. Study on the influence of glue line defect on flexural rigidity of glulam beams[J]. Highway Engineering, 2018, 43(4): 77-80.
BOHANNAN B．Effect of size on bending strength of wood members[R]United States Forest Service Research Paper FPL 56． Madison：Forest Products Laboratory USDA Forest Service，1996.
周先雁, 曹磊, 曾丹, 等. 胶合木梁抗弯承载力分析[J]. 建筑结构, 2015, 45(22): 91-96.
ZHOU X Y, CAO L, ZENG D, et al. Flexural capacity analysis of glulam beams[J]. Building Structure, 2015, 45(22): 91-96.
Franke S, Franke B, Harte A M. Failure modes and reinforcement techniques for timber beams - State of the art[J]. Construction and Building Materials, 2015, 97: 2-13.
曹磊, 张仲凤, 曾丹, 等. 落叶松胶合木梁疲劳性能试验研究[J]. 建筑结构学报, 2016, 37(10): 27-35.
CAO L, ZHANG Z F, ZENG D, et al. Experimental research on fatigue behavior of larch glulam beams[J]. Journal of Building Structures, 2016, 37(10): 27-35.
张庆. 层板胶合木梁受力性能的试验探究[J]. 四川建材, 2018, 44(9): 76-77.
陈溪, 吴勇, 陈玲珠, 等. 9 m长胶合木梁受弯性能和炭化速度的试验研究[J]. 工业建筑, 2018, 48(3): 63-67, 131.
CHEN X, WU Y, CHEN L Z, et al. Experimental research on flexural behavior and charring rate of a 9-meter-span long glulam beam[J]. Industrial Construction, 2018, 48(3): 63-67, 131.
奉佳, 王雪亮, 徐乾罡, 等. 指接足尺层板胶合木梁抗弯试验研究[J]. 建筑结构, 2020, 50(S1): 252-255.
FENG J, WANG X L, XU Q G, et al. Experimental research on flexural behavior of finger-jointed full-size glued-laminated timber beams[J]. Building Structure, 2020, 50(S1): 252-255.
Plevris N, Triantafillou T C. FRP-reinforced wood as structural material[J]. Journal of Materials in Civil Engineering, 1992, 4(3): 300-317.
Wdowiak-Postulak A, Świt G. Behavior of glulam beams strengthened in bending with BFRP fabrics[J]. Civil and Environmental Engineering Reports, 2021, 31(2): 1-14.
王玉镯,马云鹏,王兰芹,等.碳纤维增强速生杨胶合木梁的受弯性能[J/OL].土木与环境工程学报(中英文):1-13[2021-08-26].
WANG Y Z, MA Y P, WANG L Q, et al Flexural behavior of fast-growing poplar glulam beams reinforced by carbon fiber[J/OL]. Journal of Civil and Environmental Engineering:1-13[2021-08-26].
CHEN Z X, HE R L, ZHAO Q Q, et al. Test on the mechanical performance of glue-laminated timber reinforced with GFRP for structural materials[J]. Applied Mechanics and Materials, 2016, 847: 53-59.
王菲彬, 杨晓琳, 徐伟涛, 等. GFRP筋增强胶合木梁抗弯性能研究[J]. 林产工业, 2017, 44(11): 18-23.
WANG F B, YANG X L, XU W T, et al. Study on bending behavior of glulam beams reinforced with bonded-in GFRP rods[J]. China Forest Products Industry, 2017, 44(11): 18-23.
左宏亮, 付丁虬, 邱一桐, 等. 配筋形式对配筋胶合木梁受弯性能影响试验[J]. 沈阳建筑大学学报(自然科学版), 2017, 33(4): 621-628.
ZUO H L, FU D Q, QIU Y T, et al. Bending performance test on the different forms of reinforced glulam beams[J]. Journal of Shenyang Jianzhu University (Natural Science), 2017, 33(4): 621-628.
Yeboah D, Gkantou M. Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars[J]. Structures, 2021, 33: 390-405.
陈爱军, 贺国京, 蔡郭圣, 等. BFRP筋增强胶合木梁受力性能分析[J]. 中南林业科技大学学报, 2019, 39(3): 107-113.
CHEN A J, HE G J, CAI G S, et al. Experimental study on mechanical behaviour of glulam timber beams reinforced with BFRP[J]. Journal of Central South University of Forestry ＆ Technology, 2019, 39(3): 107-113.
左宏亮, 李熠诗, 付丁虬, 等. 尺寸效应对配筋胶合木梁受弯性能的影响[J]. 东北林业大学学报, 2019, 47(8): 62-65.
ZUO H L, LI Y S, FU D Q, et al. Bending performance test on the different forms of reinforced glulam beams[J]. Journal of Northeast Forestry University, 2019, 47(8): 62-65.
李志强, 王小东. 玄武岩纤维增强组合木梁抗弯性能的试验研究[J]. 河北建筑工程学院学报, 2017, 35(2): 25-30.
LI Z Q, WANG X D. Study on flexural behavior of fiber-reinforced composite timber beams with basalt[J]. Journal of Hebei Institute of Architecture and Civil Engineering, 2017, 35(2): 25-30.
杨会峰,刘伟庆.FRP增强胶合木梁的受弯性能研究[J].建筑结构学报,2007(01):64-71.
YANG H F, LIU W Q. Study on flexural behavior of FRP reinforced glulam beams[J]. Journal of Building Structures,2007(01):64-71.
陆伟东, 刘伟庆, 耿启凡, 等. 竖嵌CFRP板条层板增强的胶合木梁受弯性能研究[J]. 建筑结构学报, 2014, 35(8): 151-157.
LU W D, LIU W Q, GENG Q F, et al. Study on flexural behavior of glued laminated timber beams reinforced with vertical CFRP lath inlay[J]. Journal of Building Structures, 2014, 35(8): 151-157.
卜娜蕊, 王小东, 孔祥强, 等. 玄武岩纤维增强整体木梁抗弯性能的承载力计算[J]. 河北建筑工程学院学报, 2017, 35(4): 41-45, 50.
BU N R, WANG X D, KONG X Q, et al. Calculation of flexural capacity of the overall performance of the basalt fiber-reinforced beams[J]. Journal of Hebei Institute of Architecture and Civil Engineering, 2017, 35(4): 41-45, 50.
Kliger R, Johansson M, Crocetti R. Strengthening timber with CFRP or steel plates–short and long-term performance[C]//Proceedings of world conference on timber engineering, Miyazaki, Japan, 2008.
杨昕卉, 薛伟, 郭楠. 钢板增强胶合木梁的抗弯性能[J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
YANG X H, XUE W, GUO N. Bending performance of glued-lumber beam reinforced with steel plate[J]. Journal of Jilin University (Engineering and Technology Edition), 2017, 47(2): 468-477.
陈伯望, 刘陈诚, 刘建文, 等. 小跨高比胶合木梁受弯性能及增强试验[J]. 建筑科学与工程学报, 2019, 36(6): 26-34.
CHEN B W, LIU C C, LIU J W, et al. Experiment on flexural behavior and strengthening of glued timber beams with small span to height ratio[J]. Journal of Architecture and Civil Engineering, 2019, 36(6): 26-34.
陈冠华, 刘琦, 曾宪沂, 等. 重组竹板增强胶合木梁研究[J]. 山西建筑, 2015, 41(34): 53-54.
CHEN G H, LIU Q, ZENG X Y, et al. Study on reconstituted bamboo board strengthening laminated wood beam[J]. Shanxi Architecture, 2015, 41(34): 53-54.
冷予冰, 欧加加, 许清风. 工程竹木梁受弯性能试验研究[J]. 施工技术, 2020, 49(15): 5-8, 88.
LENG Y B, OU J J, XU Q F. Experimental study on bending performance of engineered bamboo timber beam[J]. Construction Technology, 2020, 49(15): 5-8, 88.
郭楠, 张平阳, 左煜, 等. 竹板增强胶合木梁受弯性能[J]. 吉林大学学报(工学版), 2017, 47(3): 778-788.
GUO N, ZHANG P Y, ZUO Y, et al. Bending performance of glue-lumber beam reinforced by bamboo plyboard[J]. Journal of Jilin University (Engineering and Technology Edition), 2017, 47(3): 778-788.
李杰, 申世杰, 赵立. FRP增强结构用集成材木梁弯曲力学性能研究[J]. 木材加工机械, 2014, 25(5): 41-43, 47.
LI J, SHEN S J, ZHAO L. Bending mechanical properties study on glulam beam strengthened by basalt fiber reinforced polymer[J]. Wood Processing Machinery, 2014, 25(5): 41-43, 47.
相关作者
相关机构
京公网安备11010802024621
微信公众号