铺装方式对杨木重组木性能的影响

梁艳君; 张亚慧; 余养伦; 韦亚南; 于文吉

doi:10.19455/j.mcgy.20170309

“高性能重组木制造技术”专栏(7) | 浏览量 : 0 下载量: 99 CSCD: 7

PDF
导出
分享
收藏
专辑

铺装方式对杨木重组木性能的影响
Effect of Strand Mat Forming on Poplar Scrimber Properties
1. 中国林科院木材工业研究所
2. 西南林业大学
3. 中国林科院林业新技术研究所
2017年31卷第3期页码：40-43
DOI： 10.19455/j.mcgy.20170309

扫描看全文

[1]梁艳君,张亚慧,余养伦,韦亚南,于文吉.铺装方式对杨木重组木性能的影响[J].木材工业,2017,31(03):40-43.

LIANG Yan-jun, ZHANG Ya-hui, YU Yang-lun, et al. Effect of Strand Mat Forming on Poplar Scrimber Properties[J]. China Wood Industry, 2017,31(3):40-43.
[1]梁艳君,张亚慧,余养伦,韦亚南,于文吉.铺装方式对杨木重组木性能的影响[J].木材工业,2017,31(03):40-43. DOI： 10.19455/j.mcgy.20170309.

LIANG Yan-jun, ZHANG Ya-hui, YU Yang-lun, et al. Effect of Strand Mat Forming on Poplar Scrimber Properties[J]. China Wood Industry, 2017,31(3):40-43. DOI： 10.19455/j.mcgy.20170309.

摘要

采用平行铺放和随机堆放两种铺装方式,分别制备重组木产品。结果表明:随机堆放的重组木花纹呈平行状线条,平行铺放则呈现较强的实木感;采用平行铺放方式,坯料盖板达到预定位置所需成型压力较小,时间更短;铺装方式对重组木材料的力学和耐水性能的影响均不明显;在铣槽加工时,平行铺放的产品无槽口劈裂、通裂现象。

Abstract

The authors made Populus scrimbers by random and parallel forming the wood strands,respectively. The results showed that parallel forming resulted in a reduced molding pressure and shortened pressing time but that there was little effect on mechanical properties and water resistance of the scrimbers even though there was a difference in textures and patterns.