我国四种珍贵阔叶人工林木材的机械加工性能评价

谢雪霞; 刘波; 孙华林; 姜笑梅; 殷亚方

doi:10.19455/j.mcgy.2014.05.011

讨论与建议 | 浏览量 : 0 下载量: 133 CSCD: 10

PDF
导出
分享
收藏
专辑

我国四种珍贵阔叶人工林木材的机械加工性能评价
Evaluation on Wood Machining Properties of Four Valuable Hardwood Species from Forest Plantations in China
1. 中国林科院木材工业研究所
2014年28卷第5期页码：36-40
DOI： 10.19455/j.mcgy.2014.05.011

扫描看全文

[1]谢雪霞,刘波,孙华林,姜笑梅,殷亚方.我国四种珍贵阔叶人工林木材的机械加工性能评价[J].木材工业,2014,28(05):36-40.

XIE Xue-xia, LIU Bo, SUN Hua-lin, et al. Evaluation on Wood Machining Properties of Four Valuable Hardwood Species from Forest Plantations in China[J]. China Wood Industry, 2014,28(5):36-40.
[1]谢雪霞,刘波,孙华林,姜笑梅,殷亚方.我国四种珍贵阔叶人工林木材的机械加工性能评价[J].木材工业,2014,28(05):36-40. DOI： 10.19455/j.mcgy.2014.05.011.

XIE Xue-xia, LIU Bo, SUN Hua-lin, et al. Evaluation on Wood Machining Properties of Four Valuable Hardwood Species from Forest Plantations in China[J]. China Wood Industry, 2014,28(5):36-40. DOI： 10.19455/j.mcgy.2014.05.011.

摘要

通过研究香樟、核桃楸、木荷和鹅掌楸4种珍贵阔叶树种木材的机械加工性能,为其人工林木材的高附加值利用提供科学依据。分别测试4种人工林木材的刨削、砂削、铣削、钻削、车削和榫加工等机械加工性能。结果表明:香樟、木荷和鹅掌楸的综合机械加工性能优于核桃楸;在刨削加工过程中,随着刨削深度和进料速度的增大,刨削质量下降;进料速度对刨削加工性能的影响大于刨削深度。

Abstract

To determine wood machining properties of valuable hardwood species for high valueadded utilization of solid wood products,planning,sanding,shaping,boring,turning and mortising of Cinnamomum camphora,Juglans mandshurica,Schima superba and Liriodendron chinense from foreat plantations in China were evaluated respectively,according to Chinese forestry industrial standard LY/T 2054-2012.The results showed that the comprehensive machining properties of Cinnamomum camphora,Schima superba and Liriodendron chinense were better than that of Juglans mandshurica.Furthermore,wood planning quality of the four selected species decreased as the increase of cutting depth and feed rate.The influence of feed rate on planning quality was greater than that of cutting depth.