杨木定向木片层积材的制备工艺初探

刘翔; 高黎; 张双保; 袁应粮

doi:10.19455/j.mcgy.2014.05.006

研究与开发 | 浏览量 : 0 下载量: 76 CSCD: 4

PDF
导出
分享
收藏
专辑

杨木定向木片层积材的制备工艺初探
Primary Study on Manufacturing Technology of Poplar Oriented Strand Lumber
1. 广西林业集团有限公司
2. 中国林科院木材工业研究所
3. 北京林业大学材料科学与技术学院
4. 浙江裕华木业有限公司
2014年28卷第5期页码：20-23
DOI： 10.19455/j.mcgy.2014.05.006

扫描看全文

[1]刘翔,高黎,张双保,袁应粮.杨木定向木片层积材的制备工艺初探[J].木材工业,2014,28(05):20-23+27.

LIU Xiang, GAO Li, ZHANG Shuang-bao, et al. Primary Study on Manufacturing Technology of Poplar Oriented Strand Lumber[J]. China Wood Industry, 2014,28(5):20-23.
[1]刘翔,高黎,张双保,袁应粮.杨木定向木片层积材的制备工艺初探[J].木材工业,2014,28(05):20-23+27. DOI： 10.19455/j.mcgy.2014.05.006.

LIU Xiang, GAO Li, ZHANG Shuang-bao, et al. Primary Study on Manufacturing Technology of Poplar Oriented Strand Lumber[J]. China Wood Industry, 2014,28(5):20-23. DOI： 10.19455/j.mcgy.2014.05.006.

摘要

以杨木碎单板条为原料制备定向木片层积材（OSL）,研究了单板条长度、宽度、热压时间与板材密度,对杨木OSL性能的影响。结果表明:板材密度是影响OSL性能的最主要因素;采用优化工艺生产的杨木OSL,性能远超EN300-2006中OSB/4等级板材性能要求。

Abstract

Populus euramevicana veneer strands were used as raw materials to make oriented strand lumber（OSL）.The influence of strand length,stand width,hot-pressing time and board density on physical and mechanical properties was evaluated.The results showed that the density was the most important factor affecting the properties of the OSL and that the properties of the OSL made under optimum processing conditions could far exceed the requirement of OSB/4grade of European Standard EN 300-2006.