三种非常用树种人工林木材的机械加工性能评价

谢雪霞; 刘波; 孙华林; 姜笑梅; 殷亚方

doi:10.19455/j.mcgy.2014.04.008

讨论与建议 | 浏览量 : 0 下载量: 93 CSCD: 10

PDF
导出
分享
收藏
专辑

三种非常用树种人工林木材的机械加工性能评价
Evaluating on Machining Properties of Wood of Three Less-Commercially Used Plantation Species
1. 中国林科院木材工业研究所
2014年28卷第4期页码：28-31
DOI： 10.19455/j.mcgy.2014.04.008

扫描看全文

[1]谢雪霞,刘波,孙华林,姜笑梅,殷亚方.三种非常用树种人工林木材的机械加工性能评价[J].木材工业,2014,28(04):28-31.

XIE Xue-xia, LIU Bo, SUN Hua-lin, et al. Evaluating on Machining Properties of Wood of Three Less-Commercially Used Plantation Species[J]. China Wood Industry, 2014,28(4):28-31.
[1]谢雪霞,刘波,孙华林,姜笑梅,殷亚方.三种非常用树种人工林木材的机械加工性能评价[J].木材工业,2014,28(04):28-31. DOI： 10.19455/j.mcgy.2014.04.008.

XIE Xue-xia, LIU Bo, SUN Hua-lin, et al. Evaluating on Machining Properties of Wood of Three Less-Commercially Used Plantation Species[J]. China Wood Industry, 2014,28(4):28-31. DOI： 10.19455/j.mcgy.2014.04.008.

摘要

通过研究栗木、刺槐和柳杉3种非常用树种的木材机械加工性能,为其高附加值利用提供科学依据。分别测试了3种木材的刨削、砂削、铣削、钻削等机械加工性能。结果表明:栗木和刺槐的综合机械加工性能优于柳杉;随着刨削深度和进料速度的增大,刨削质量下降,其中,进料速度对刨削加工性能的影响大于刨削深度。

Abstract

To determine wood machining properties of less-commercially used species for high value-added utilization,planning,sanding,shaping,boring,turning and mortising of Castanea mollissima,Robinia pseudoacacia and Cryptomeria fortunei from plantation resources were evaluated respectively,according to Chinese forestry industrial standard LY/T2054-2012.Moreover,the effect of cutting depth and feed rate on planning quality was investigated.The results showed that the comprehensive machining properties of Castanea mollissima and Robinia pseudoacacia were better than that of Cryptomeria fortunei.Furthermore,wood planning quality of the three species decreased as the increase of cutting depth and feed speed.Also,the effect of feed rate on planning quality was greater than that of cutting depth.