大断面六棱柱体胶拼压机的设计

丁建文; 郭晓磊; 郝敬东; 李荣荣; 曹平祥

doi:10.19455/j.mcgy.2014.03.001

“小径木材高效加工利用技术”专栏(之五) | 浏览量 : 0 下载量: 63 CSCD: 6

PDF
导出
分享
收藏
专辑

大断面六棱柱体胶拼压机的设计
Pressing Machine Design for Six-Sided Cylinder Glulam
1. 南京林业大学材料科学与工程学院
2014年28卷第3期页码：5-8
DOI： 10.19455/j.mcgy.2014.03.001

扫描看全文

[1]丁建文,郭晓磊,郝敬东,李荣荣,曹平祥.大断面六棱柱体胶拼压机的设计[J].木材工业,2014,28(03):5-8.

DING Jian-wen, GUO Xiao-lei, HAO Jing-dong, et al. Pressing Machine Design for Six-Sided Cylinder Glulam[J]. China Wood Industry, 2014,28(3):5-8.
[1]丁建文,郭晓磊,郝敬东,李荣荣,曹平祥.大断面六棱柱体胶拼压机的设计[J].木材工业,2014,28(03):5-8. DOI： 10.19455/j.mcgy.2014.03.001.

DING Jian-wen, GUO Xiao-lei, HAO Jing-dong, et al. Pressing Machine Design for Six-Sided Cylinder Glulam[J]. China Wood Industry, 2014,28(3):5-8. DOI： 10.19455/j.mcgy.2014.03.001.

摘要

大断面六棱柱体胶拼压机是小径材高效加工利用的关键设备之一,应用SolidWorks进行压机装配图、零部件图的三维设计,并利用PropertyManager进行工作机构的运动仿真分析。结果表明,各运动部件机构不存在相互干涉,验证了大断面六棱柱体胶拼压机结构设计方案的合理性和可靠性。

Abstract

A pressing machine for six-sided cylinder glulam is one of key machines for smalldiameter log processing.SolidWorks software was used in designing diagrams for three-dimensional assembly drawings and parts.Movement interference analysis of the operating mechanisms was analyzed by PropertyManager.The results showed that there was no interference among these operating mechanisms,which verified rational and reliable design plans for the pressing machine for the six-sided cylinder glulam.