木纤维/聚酯纤维复合材料的制备工艺及其吸声性能

王军锋; 彭立民; 傅峰; 张耀丽; 王东

doi:10.19455/j.mcgy.2013.06.011

应用技术 | 浏览量 : 0 下载量: 250 CSCD: 13

PDF
导出
分享
收藏
专辑

木纤维/聚酯纤维复合材料的制备工艺及其吸声性能
Effect of Manufacture Technique on Sound Absorption Property of Wood Fiber/Polyester Fiber Composite Material
1. 中国林科院木材工业研究所
2. 南京林业大学木材工业学院
2013年27卷第6期页码：41-44
DOI： 10.19455/j.mcgy.2013.06.011

扫描看全文

[1]王军锋,彭立民,傅峰,张耀丽,王东.木纤维/聚酯纤维复合材料的制备工艺及其吸声性能[J].木材工业,2013,27(06):41-44.

WANG Jun-feng, PENG Li-min, FU Feng, et al. Effect of Manufacture Technique on Sound Absorption Property of Wood Fiber/Polyester Fiber Composite Material[J]. China Wood Industry, 2013,27(6):41-44.
[1]王军锋,彭立民,傅峰,张耀丽,王东.木纤维/聚酯纤维复合材料的制备工艺及其吸声性能[J].木材工业,2013,27(06):41-44. DOI： 10.19455/j.mcgy.2013.06.011.

WANG Jun-feng, PENG Li-min, FU Feng, et al. Effect of Manufacture Technique on Sound Absorption Property of Wood Fiber/Polyester Fiber Composite Material[J]. China Wood Industry, 2013,27(6):41-44. DOI： 10.19455/j.mcgy.2013.06.011.

摘要

为开发利用生物质资源制备吸声材料,探讨木纤维和聚酯纤维质量比、施胶量、发泡剂添加量和密度等因素对复合材料吸声性能的影响。结果表明:各因素对复合材料的吸声性能均有显著影响;当木纤维和聚酯纤维质量比为3∶1、施胶量12%、发泡剂添加量8%和密度为0.2g/cm3时,复合材料的中高频段吸声性能较优,成本可降低30%。

Abstract

For developing low cost sound absorption materials made of wood fiber,the authors analyzed the effects of selected four parameters,such as proportion of wood fiber and polyester fiber,resin consumption,foaming agents content and board density of composite material on sound absorbing coefficients of the composite materials,which were measured by impedance tube instrument.The results showed that the factors had impact on sound absorption coefficient of the samples significantly,and as the fiber ratio of wood and polyester was 3∶1 with 12% resin content,8% foaming agent content and 0.2g/cm3 density,the sound absorption property of the composite samples showed excellent in middle-high frequency with 30% of manufacturing cost saved.