木门门框角部加工专用数控锯钻机的研发

姚遥; 姚永和; 张占宽; 李伟光

doi:10.19455/j.mcgy.2013.01.003

研究与开发 | 浏览量 : 0 下载量: 59 CSCD: 4

PDF
导出
分享
收藏
专辑

木门门框角部加工专用数控锯钻机的研发
Development of Computerized Machine for Cutting and Drilling Wooden Door Frame
1. 上海跃通木工机械设备有限公司
2. 中国林科院木材工业研究所
2013年27卷第1期页码：9-12
DOI： 10.19455/j.mcgy.2013.01.003

扫描看全文

[1]姚遥,姚永和,张占宽,李伟光.木门门框角部加工专用数控锯钻机的研发[J].木材工业,2013,27(01):9-12.

YAO Yao1, YAO Yong-he1, ZHANG Zhang-kuan2, et al. Development of Computerized Machine for Cutting and Drilling Wooden Door Frame[J]. China Wood Industry, 2013,27(1):9-12.
[1]姚遥,姚永和,张占宽,李伟光.木门门框角部加工专用数控锯钻机的研发[J].木材工业,2013,27(01):9-12. DOI： 10.19455/j.mcgy.2013.01.003.

YAO Yao1, YAO Yong-he1, ZHANG Zhang-kuan2, et al. Development of Computerized Machine for Cutting and Drilling Wooden Door Frame[J]. China Wood Industry, 2013,27(1):9-12. DOI： 10.19455/j.mcgy.2013.01.003.

摘要

为解决木门产业发展与机械化制造水平的矛盾,根据木门制造企业对门框加工装备的实际要求,研究机床的技术方案、参数、结构以及U型锯切技术,开发集锯切、钻削于一体的数控门框角部锯钻专用装备。一次装夹定位可完成45°角部定长锯切、定位孔以及连接件安装孔加工等工序,适用于不同种类、规格门框的加工。

Abstract

The authors developed a numerical control machine for cutting and drilling door frame components based on the actual requirements for processing wooden door frames.Advanced computerized control techniques were used to set sawing and drilling patterns with a single clamping position.The machine was capable of making different wooden door frames.

关键词

门框数控锯钻机U型锯切一次装夹

Keywords

wooden door framecomputerized controlcutting and drilling machineU type sawinga single position clamping

references

文章被引用时，请邮件提醒。

提交

木门门扇四工位自动喷涂机的开发

木门五金件孔槽专用数控加工机的研发