热处理材的铣削加工性能分析

丁涛; 顾炼百; 朱南峰; 郭小磊; 贺文杰

doi:10.19455/j.mcgy.2012.02.006

研究与开发 | 浏览量 : 0 下载量: 109 CSCD: 9

导出
分享
收藏
专辑

热处理材的铣削加工性能分析
Milling Process Performance of Heat-treated Wood
1. 南京林业大学木材工业学院
2012年26卷第2期页码：22-24
DOI： 10.19455/j.mcgy.2012.02.006

扫描看全文

[1]丁涛,顾炼百,朱南峰,郭小磊,贺文杰.热处理材的铣削加工性能分析[J].木材工业,2012,26(02):22-24+54.

DING Tao, GU Lian-bai, ZHU Nan-feng, et al. Milling Process Performance of Heat-treated Wood[J]. China Wood Industry, 2012,26(2):22-24.
[1]丁涛,顾炼百,朱南峰,郭小磊,贺文杰.热处理材的铣削加工性能分析[J].木材工业,2012,26(02):22-24+54. DOI： 10.19455/j.mcgy.2012.02.006.

DING Tao, GU Lian-bai, ZHU Nan-feng, et al. Milling Process Performance of Heat-treated Wood[J]. China Wood Industry, 2012,26(2):22-24. DOI： 10.19455/j.mcgy.2012.02.006.

摘要

考察热处理对木材机械加工性能的影响,为优化热处理材的加工工艺提供借鉴,在本试验确定的加工参数条件下,对热处理柞木进行了铣削加工。试验结果表明,相比对照材,铣削加工热处理材时刀体的温度更低,在加工过程中排放的较小粒径粉尘的比例增加,热处理材加工面的粗糙度与对照材并没有显著差异。

Abstract

The authors studied the effect of heat treatment on the machinability of Mongolian oak.Compared with untreated samples,heat-treated wood samples exhibited lower cutting-tool temperature and generated more fine dust during the milling process.The smoothness of the heat-treated samples was statistically the same as the untreated samples.The results will hopefully provide some insight into optimizing the milling process.