木门异形表面砂光粗糙度分析

张占宽; 彭晓瑞; 王宝刚; 张杰; 李伟光

doi:10.19455/j.mcgy.2012.02.004

研究与开发 | 浏览量 : 0 下载量: 152 CSCD: 13

导出
分享
收藏
专辑

木门异形表面砂光粗糙度分析
Surface Quality Evaluation after Sanding Wooden Doors
1. 中国林科院木材工业研究所国家林业局木材科学与技术重点实验室
2012年26卷第2期页码：14-17
DOI： 10.19455/j.mcgy.2012.02.004

扫描看全文

[1]张占宽,彭晓瑞,王宝刚,张杰,李伟光.木门异形表面砂光粗糙度分析[J].木材工业,2012,26(02):14-17.

ZHANG Zhan-kuan, PENG Xiao-rui, WANG Bao-gang, et al. Surface Quality Evaluation after Sanding Wooden Doors[J]. China Wood Industry, 2012,26(2):14-17.
[1]张占宽,彭晓瑞,王宝刚,张杰,李伟光.木门异形表面砂光粗糙度分析[J].木材工业,2012,26(02):14-17. DOI： 10.19455/j.mcgy.2012.02.004.

ZHANG Zhan-kuan, PENG Xiao-rui, WANG Bao-gang, et al. Surface Quality Evaluation after Sanding Wooden Doors[J]. China Wood Industry, 2012,26(2):14-17. DOI： 10.19455/j.mcgy.2012.02.004.

摘要

选取水曲柳、黑胡桃、樱桃木三种常用树种的薄木贴面木门为试验对象,分别对素门、涂饰1道底漆和2道底漆后的木门进行砂光,检测各道砂光工序后木门的表面粗糙度,并分析其变化规律,为木门机械化异形砂光提供量化评价数据,生产企业砂光工艺的优化和质量控制提供参考。

Abstract

Sanding is an important process in wood door manufacturing for overall appearance.Wooden doors made from ash,black walnut,and cherry decorative veneers were selected for their irregular appearance for this study.The doors were sanded and painted twice with primer.The surface roughness was evaluated before and after each sanding process.The authors expect the results will provide a reference for optimizing the wood door sanding process,improving door quality and establishing relevant standards.