制造工艺对竹基纤维复合材料性能的影响

祝荣先; 周月; 任丁华; 余养伦; 于文吉

doi:10.19455/j.mcgy.2011.03.001

“小径竹高效利用技术”专栏 | 浏览量 : 0 下载量: 236 CSCD: 33

PDF
导出
分享
收藏
专辑

制造工艺对竹基纤维复合材料性能的影响
Effect of Manufacturing Methods on Bamboo-Fiber Based Composite Performance
1. 中国林科院木材工业研究所国家林业局木材科学与技术重点实验室
2011年25卷第3期页码：1-3
DOI： 10.19455/j.mcgy.2011.03.001

扫描看全文

[1]祝荣先,周月,任丁华,余养伦,于文吉.制造工艺对竹基纤维复合材料性能的影响[J].木材工业,2011,25(03):1-3.

ZHU Rong-xian, ZHOU Yue, REN Ding-hua, et al. Effect of Manufacturing Methods on Bamboo-Fiber Based Composite Performance[J]. China Wood Industry, 2011,25(3):1-3.
[1]祝荣先,周月,任丁华,余养伦,于文吉.制造工艺对竹基纤维复合材料性能的影响[J].木材工业,2011,25(03):1-3. DOI： 10.19455/j.mcgy.2011.03.001.

ZHU Rong-xian, ZHOU Yue, REN Ding-hua, et al. Effect of Manufacturing Methods on Bamboo-Fiber Based Composite Performance[J]. China Wood Industry, 2011,25(3):1-3. DOI： 10.19455/j.mcgy.2011.03.001.

摘要

采用冷、热压两种生产工艺,分别制备不同密度（0.85～1.20g/cm3）的竹基纤维复合材料,并检测其物理力学性能。结果表明:两种生产工艺均可制备出物理力学性能优良的竹基纤维复合材料,其中:冷压生产的竹基纤维复合材料的耐水性能较好,热压生产的竹基纤维复合材料的抗弯性能和抗剪切性能更优。

Abstract

The authors made bamboo-fiber based composites with bamboo obtained from a factory. The composites had densities between 0.85 to 1.20 g/cm3 using cold-pressing and hot-pressing methods. The major mechanical and physical properties of these composites were tested. The results showed that both cold-pressing and hot-pressing methods produced composites with high physical and mechanical performance. The composites produced by cold-pressing had better water resistance than those produced by hot pressing. However, the composites produced by hot-pressing had higher bending and shear strengths.