磁混凝技术在中纤板废水前处理中的应用

徐颖; 张齐生; 张鑫; 刘新

doi:10.19455/j.mcgy.2011.01.012

应用技术 | 浏览量 : 0 下载量: 224 CSCD: 6

PDF
导出
分享
收藏
专辑

磁混凝技术在中纤板废水前处理中的应用
Applying Magnetic Coagulation Technology to Wastewater Treatment during Medium Density Fiberboard Production
1. 南京林业大学竹材工程研究中心
2011年25卷第1期页码：38-40
DOI： 10.19455/j.mcgy.2011.01.012

扫描看全文

[1]徐颖,张齐生,张鑫,刘新.磁混凝技术在中纤板废水前处理中的应用[J].木材工业,2011,25(01):38-40.

XU Ying, ZHANG Qi-sheng, ZHANG Xin, et al. Applying Magnetic Coagulation Technology to Wastewater Treatment during Medium Density Fiberboard Production[J]. China Wood Industry, 2011,25(1):38-40.
[1]徐颖,张齐生,张鑫,刘新.磁混凝技术在中纤板废水前处理中的应用[J].木材工业,2011,25(01):38-40. DOI： 10.19455/j.mcgy.2011.01.012.

XU Ying, ZHANG Qi-sheng, ZHANG Xin, et al. Applying Magnetic Coagulation Technology to Wastewater Treatment during Medium Density Fiberboard Production[J]. China Wood Industry, 2011,25(1):38-40. DOI： 10.19455/j.mcgy.2011.01.012.

摘要

采用磁混凝技术处理中纤板废水。研究了磁粉、混凝剂和助凝剂的种类及其比率的影响。试验结果表明,使用A磁粉的磁混凝技术处理中纤板废水,化学耗氧量（COD）去除率最高可达88.03%,较单纯采用混凝技术COD去除率提高了52.25%;悬浮物（SS）去除率达98.91%,提高了约4%;色度去除率达98.01%,提高约3%。

Abstract

Wastewater from medium density fiberboard production was treated using magnetic coagulation technology with aluminium polychloride,polyacrylamide,and magnetic particles.The chemical oxygen demand（COD） removal efficiency of the magnetic coagulation method reached to 88.03%,which was improved by about 52.25% when compared to a sole coagulation technology.The suspended solid removal rate was 98.91%,which was about a 4% improvement.The color removal rate was 98.01%,which was improved by 3%.

关键词

中纤板废水磁混凝技术纳米级磁粉混凝化学耗氧量（COD）

Keywords

MDF waste watermagnetic coagulation（MC）nano magneticcoagulationchemical oxygen demand（COD）

references

文章被引用时，请邮件提醒。

提交

中纤板废水的预处理研究