提高竹丝板尺寸稳定性的研究

方群; 沙存龙; 槐敏; 杨优优; 沈哲红

doi:10.19455/j.mcgy.2010.01.011

应用技术 | 浏览量 : 0 下载量: 116 CSCD: 4

PDF
导出
分享
收藏
专辑

提高竹丝板尺寸稳定性的研究
Dimension Stability of Panels Made from Crushed Bamboo Strips
1. 浙江林学院工程学院
2. 国家木质资源综合利用工程技术研究中心
3. 宁波鄞州区林业技术管理服务站
2010年24卷第1期页码：36-38
DOI： 10.19455/j.mcgy.2010.01.011

扫描看全文

[1]方群,沙存龙,槐敏,杨优优,沈哲红.提高竹丝板尺寸稳定性的研究[J].木材工业,2010,24(01):36-38.

FANG Qun1, SHA Cun-long3, HUAI Min1, et al. Dimension Stability of Panels Made from Crushed Bamboo Strips[J]. China Wood Industry, 2010,24(1):36-38.
[1]方群,沙存龙,槐敏,杨优优,沈哲红.提高竹丝板尺寸稳定性的研究[J].木材工业,2010,24(01):36-38. DOI： 10.19455/j.mcgy.2010.01.011.

FANG Qun1, SHA Cun-long3, HUAI Min1, et al. Dimension Stability of Panels Made from Crushed Bamboo Strips[J]. China Wood Industry, 2010,24(1):36-38. DOI： 10.19455/j.mcgy.2010.01.011.

摘要

研究酚醛树脂胶黏剂固体含量、常温软化、加热软化时间以及增塑剂质量分数,对竹丝板尺寸稳定性影响。结果表明,提高树脂固体含量以及同时进行软化处理,可明显提高竹丝板的尺寸稳定性;增塑剂用量需在6%以上时,才能发挥作用。

Abstract

Effects of solid content of phenol formaldehyde （PF） resin solution,softening treatment time and softening agents,and use of plasticizer on dimensional stability of boards made from crushed bamboo strips were investigated. The results showed that the solid content of PF resin solution and softening pretreatment had considerable influence on the dimensional stability of the bamboo board,while the plasticizer content only showed the minor effect on the board dimensional stability.