影响中纤板表面结合强度检测值的因子分析

花铁果; 梁德沛; 海凌超; 王红强

doi:10.19455/j.mcgy.2009.06.009

应用技术 | 浏览量 : 0 下载量: 95 CSCD: 1

PDF
导出
分享
收藏
专辑

影响中纤板表面结合强度检测值的因子分析
Factors Influencing Medium Density Fiberboard Surface Bond Strength
1. 国家家具产品质量监督检验中心,广东
2. 广东省产品质量监督检验中心
2009年23卷第6期页码：28-30
DOI： 10.19455/j.mcgy.2009.06.009

扫描看全文

[1]花铁果,梁德沛,海凌超,王红强.影响中纤板表面结合强度检测值的因子分析[J].木材工业,2009,23(06):28-30.

HUA Tie-guo1, LIANG De-pei2, HAI Ling-chao1, et al. Factors Influencing Medium Density Fiberboard Surface Bond Strength[J]. China Wood Industry, 2009,23(6):28-30.
[1]花铁果,梁德沛,海凌超,王红强.影响中纤板表面结合强度检测值的因子分析[J].木材工业,2009,23(06):28-30. DOI： 10.19455/j.mcgy.2009.06.009.

HUA Tie-guo1, LIANG De-pei2, HAI Ling-chao1, et al. Factors Influencing Medium Density Fiberboard Surface Bond Strength[J]. China Wood Industry, 2009,23(6):28-30. DOI： 10.19455/j.mcgy.2009.06.009.

摘要

分析了中密度纤维板试件检测时,所用万向节数量及试件与卡头胶结后的存放时间,对表面结合强度测试结果的影响。结果表明:使用2个万向节检测的表面结合强度测试值,比用1个和不用的影响要大;试件与卡头胶结后,随着存放时间的延长,表面结合强度先增大,且在1 h时达到最大值,然后逐渐减小,最后趋于恒定。

Abstract

The authors investigated the effects of universal joint and specimen storage time after bonding with the universal joints on surface bond strength of medium density fiberboard（MDF）.The results showed that the specimen exhibited higher surface bond strength when two universal joints were used compared to none or one universal joint was used.As the storage time was extended from 0 to 6 hours,the surface bond strength first increased,reached the maximum value at 1 hour,and then decreased to become stable.