X射线在防腐木材有效成分测定中的应用

唐镇忠; 于丽丽; 韩玉杰; 宋常明; 曹金珍

doi:10.19455/j.mcgy.2008.05.012

应用技术 | 浏览量 : 0 下载量: 149 CSCD: 3

PDF
导出
分享
收藏
专辑

X射线在防腐木材有效成分测定中的应用
Application of X-ray Fluorescence in Determination Active Ingredients of Preservative-treated Wood
1. 北京林业大学材料科学与技术学院
2. 中国物流与采购联合会木材保护质量监督检验测试中心
2008年第5期页码：39-41
DOI： 10.19455/j.mcgy.2008.05.012

扫描看全文

[1]唐镇忠,于丽丽,韩玉杰,宋常明,曹金珍.X射线在防腐木材有效成分测定中的应用[J].木材工业,2008(05):39-41.

TANG Zhen-zhong1, YU Li-li1, HAN Yu-Jie2, et al. Application of X-ray Fluorescence in Determination Active Ingredients of Preservative-treated Wood[J]. China Wood Industry, 2008,(5):39-41.
[1]唐镇忠,于丽丽,韩玉杰,宋常明,曹金珍.X射线在防腐木材有效成分测定中的应用[J].木材工业,2008(05):39-41. DOI： 10.19455/j.mcgy.2008.05.012.

TANG Zhen-zhong1, YU Li-li1, HAN Yu-Jie2, et al. Application of X-ray Fluorescence in Determination Active Ingredients of Preservative-treated Wood[J]. China Wood Industry, 2008,(5):39-41. DOI： 10.19455/j.mcgy.2008.05.012.

摘要

采用X射线荧光光谱仪与原子吸收分光光度计,分别测定铬化砷酸铜（CCA）以及氨/胺溶铜季胺盐（ACQ）处理木材中活性成分的含量,并将两者的结果进行了比较和分析。结果表明,用这2种方法所测得的结果差异较小,但前者具备检测速度快、分析精度高、操作简便等优点,可在实际应用中推广。

Abstract

In this study,X-ray fluorescence（XRF） and atomic absorption spectrophotometer（AAS） were used to quantitatively determine the percentage of active ingredients in both CCA-treated and ACQ-treated wood samples.The results indicated that there was no significant difference between the two methods.However,the X-ray fluorescence had the advantage of being easier to use and fast in determining the chemical ingredients.

关键词

X射线荧光光谱仪原子吸收分光光度计防腐木材

Keywords

X-ray fluorescence（XRF）atomic absorption spectrophotometry（AAS）preservative-treated wood

references

文章被引用时，请邮件提醒。

提交

暂无数据