指接材研究现状与进展

林兰英; 傅峰

doi:10.19455/j.mcgy.2007.04.002

综述 | 浏览量 : 0 下载量: 335 CSCD: 22

PDF
导出
分享
收藏
专辑

指接材研究现状与进展
Research Status and Developing Trends of Finger-jointed Lumber
1. 中国林科院木材工业研究所
2. 国家林业局木材科学与技术重点实验室
2007年第4期页码：5-8
DOI： 10.19455/j.mcgy.2007.04.002

扫描看全文

[1]林兰英,傅峰.指接材研究现状与进展[J].木材工业,2007(04):5-8.

LIN Lan-ying, FU Feng. Research Status and Developing Trends of Finger-jointed Lumber[J]. China Wood Industry, 2007,(4):5-8.
[1]林兰英,傅峰.指接材研究现状与进展[J].木材工业,2007(04):5-8. DOI： 10.19455/j.mcgy.2007.04.002.

LIN Lan-ying, FU Feng. Research Status and Developing Trends of Finger-jointed Lumber[J]. China Wood Industry, 2007,(4):5-8. DOI： 10.19455/j.mcgy.2007.04.002.

摘要

概述国内外指接材的研究和发展现状,对指接材发展中存在的产品质量差、指接强度不高、指接接合不严密、材面质量粗糙等问题进行分析,从指接刀具、胶黏剂、指接材性能评估方法等方面提出今后的研究方向。

Abstract

This paper first reviews the research that has been done on finger-jointed lumber.It then analyzes the main problems that exist in the finger joint industry,such as low strength,poor quality,poor fit and surface roughness,etc.Finally,it presents some suggestions for future research on finger joints from finger cutter,adhesive and property evaluation methods.