杨木单板斜接研究

唐忠荣; 周淑晔; 胡孙跃; 温耀龙

doi:10.19455/j.mcgy.2006.06.008

浏览量 : 0 下载量: 89 CSCD: 7

PDF
导出
分享
收藏
专辑

杨木单板斜接研究
Study on Slip Joint for Poplar Veneer
1. 中南林业科技大学材料科学与工程学院
2. 中南林业科技大学材料科学与工程学院,长沙,410004
2006年第6期页码：23-25
DOI： 10.19455/j.mcgy.2006.06.008

扫描看全文

[1]唐忠荣,周淑晔,胡孙跃,温耀龙.杨木单板斜接研究[J].木材工业,2006(06):23-25.

TANG Zhong-rong, ZHOU Shu-ye, HU Sun-yue, et al. Study on Slip Joint for Poplar Veneer[J]. China Wood Industry, 2006,(6):23-25.
[1]唐忠荣,周淑晔,胡孙跃,温耀龙.杨木单板斜接研究[J].木材工业,2006(06):23-25. DOI： 10.19455/j.mcgy.2006.06.008.

TANG Zhong-rong, ZHOU Shu-ye, HU Sun-yue, et al. Study on Slip Joint for Poplar Veneer[J]. China Wood Industry, 2006,(6):23-25. DOI： 10.19455/j.mcgy.2006.06.008.

摘要

探讨影响杨木斜接单板抗拉强度的因子,分析斜接杨木单板在拉伸载荷作用下的破坏形式,以及磨削口纵向长度和磨削角大小对斜接杨木单板抗拉强度的影响。

Abstract

The authors conducted an experiment to investigate factors that could influence the tensile strength of scarf-jointed poplar veneer.They made several kinds of scarf-joints differing in scarf length and angle.The behavior of those scarf-jointed veneers under a load was observed.The relation between veneer tensile strength and scarf length and angle,were then analyzed.