杉木室外型中密度纤维板的制造工艺

杨小军; 曹忠荣; 曲岩春

doi:10.19455/j.mcgy.2002.03.002

浏览量 : 0 下载量: 80 CSCD: 10

PDF
导出
分享
收藏
专辑

杉木室外型中密度纤维板的制造工艺
Manufacturing Technology of Exterior Medium Density Fiberboard From Chinese Fir
1. 中国林科院木材工业研究所
2. 中国林科院木材工业研究所,北京,100091
2002年第3期页码：6-8
DOI： 10.19455/j.mcgy.2002.03.002

扫描看全文

[1]杨小军,曹忠荣,曲岩春.杉木室外型中密度纤维板的制造工艺[J].木材工业,2002(03):6-8.

YANG Xiao jun, CAO Zhong rong, QU Yan chun. Manufacturing Technology of Exterior Medium Density Fiberboard From Chinese Fir[J]. China Wood Industry, 2002,(3):6-8.
[1]杨小军,曹忠荣,曲岩春.杉木室外型中密度纤维板的制造工艺[J].木材工业,2002(03):6-8. DOI： 10.19455/j.mcgy.2002.03.002.

YANG Xiao jun, CAO Zhong rong, QU Yan chun. Manufacturing Technology of Exterior Medium Density Fiberboard From Chinese Fir[J]. China Wood Industry, 2002,(3):6-8. DOI： 10.19455/j.mcgy.2002.03.002.

摘要

采用正交试验法并对试验结果作统计分析 ,通过验证、跟踪试验 ,为杉木制造室外型中密度纤维板提供了依据。研究结果表明 :以杉木为原料制造室外型中密度纤维板是可行的 ;在本研究确定的施胶量、板密度及热压工艺条件下 ,实验室制得 9mm厚试验板材的所有性能指标均达到了国家标准的要求

Abstract

By orthogonal test and statistical analysis,as well as checking and tracing tests, a study on the manufacturing technology of exterior medium density fiberboard （MDF.E） from Chinese Fir （ Cunninghamia lanceolata） had been conducted. Results indicated that Chinese Fir could be a good raw material for manufacturing exterior medium density fiberboard;under the processing parameters of glue consumption 13%, density of board 0.88 g/cm 3, hot pressing temperature 175 ℃ and hot pressing time 6 min, the properties of the 9 mm thickness sample board made in laboratory could reach the requirement of MDF National Standard.