中密度纤维板砂光机的改进及降耗

谭飙崛

doi:10.19455/j.mcgy.2001.05.011

浏览量 : 0 下载量: 67 CSCD: 2

PDF
导出
分享
收藏
专辑

中密度纤维板砂光机的改进及降耗
Improving and Consuming-reducing of MDF Sander
1. 衡阳启泰胶合板有限公司,湖南,衡阳,421002
2001年第5期页码：33-34
DOI： 10.19455/j.mcgy.2001.05.011

扫描看全文

[1]谭飙崛.中密度纤维板砂光机的改进及降耗[J].木材工业,2001(05):33-34.

TAN Biao jue. Improving and Consuming-reducing of MDF Sander[J]. China Wood Industry, 2001,(5):33-34.
[1]谭飙崛.中密度纤维板砂光机的改进及降耗[J].木材工业,2001(05):33-34. DOI： 10.19455/j.mcgy.2001.05.011.

TAN Biao jue. Improving and Consuming-reducing of MDF Sander[J]. China Wood Industry, 2001,(5):33-34. DOI： 10.19455/j.mcgy.2001.05.011.

摘要

笔者分析了中密度纤维板砂光机消耗较高、质量较差的原因 ,提出了改进措施。实施结果表明 ,砂光机运行正常 ,砂光产量和质量同步提高 ,消耗和成本下降 ,污染减轻

Abstract

The improving measures were stated based on an analysis of reasons for large consumption and poor quality of medium density fiberboard （MDF） sander Results showed that MDF sander could run normally by putting these measures into practice, and sanding output and quality were improved, consumption and cost as well as environmental pollution were reduced