火炬松制造中密度纤维板工艺的研究

黄洛华; 曲岩春; 曹忠荣

doi:10.19455/j.mcgy.1999.05.003

浏览量 : 0 下载量: 36 CSCD: 2

PDF
导出
分享
收藏
专辑

火炬松制造中密度纤维板工艺的研究
Study on Manufacturing Process of Medium Density Fiberboard Using Loblolly Pine
1. 中国林科院木材工业研究所!北京１０００９１
1999年第5期页码：11-13
DOI： 10.19455/j.mcgy.1999.05.003

扫描看全文

[1]黄洛华,曲岩春,曹忠荣.火炬松制造中密度纤维板工艺的研究[J].木材工业,1999(05):11-13.

Huang Luohua Qu Yanchun Cao Zhongrong. Study on Manufacturing Process of Medium Density Fiberboard Using Loblolly Pine[J]. China Wood Industry, 1999,(5):11-13.
[1]黄洛华,曲岩春,曹忠荣.火炬松制造中密度纤维板工艺的研究[J].木材工业,1999(05):11-13. DOI： 10.19455/j.mcgy.1999.05.003.

Huang Luohua Qu Yanchun Cao Zhongrong. Study on Manufacturing Process of Medium Density Fiberboard Using Loblolly Pine[J]. China Wood Industry, 1999,(5):11-13. DOI： 10.19455/j.mcgy.1999.05.003.

摘要

通过对火炬松制造中密度纤维板制板工艺条件的研究，探索降低中密度纤维板制造过程中纤维施胶量的可能性。结果表明：火炬松制造中密度纤维板是可行的；采用８％的施胶量制板，板材的主要物理力学性能可达到美国ＭＤＦ国家标准ＡＮＳＴＡ２０８．２１９９４和我国ＭＤＦ国家标准７０型及８０型特级品的要求。

Abstract

This paper studied the manufacturing process of medium density fiberboard(MDF) using loblolly pine, which focused on reducing resin consumption in manufacture of MDF. The results showed that MDF made with 8% resin content could meet the requirement of MDF standard of USA(ANSI A 208.2 1994) and Chinese National Standard of MDF(GB 11718 89) in the main physical and mechanical properties.