不同下锯法锯解的分析评价

孙友富

doi:10.19455/j.mcgy.1992.04.007

浏览量 : 0 下载量: 70 CSCD: 1

PDF
导出
分享
收藏
专辑

不同下锯法锯解的分析评价
Analysis and evaluation of the sawing results by different sawing methods
1. 南京林业大学
1992年第4期页码：35-38
DOI： 10.19455/j.mcgy.1992.04.007

扫描看全文

[1]孙友富.不同下锯法锯解的分析评价[J].木材工业,1992(04):35-38.

Sun Youfu. Analysis and evaluation of the sawing results by different sawing methods[J]. China Wood Industry, 1992,(4):35-38.
[1]孙友富.不同下锯法锯解的分析评价[J].木材工业,1992(04):35-38. DOI： 10.19455/j.mcgy.1992.04.007.

Sun Youfu. Analysis and evaluation of the sawing results by different sawing methods[J]. China Wood Industry, 1992,(4):35-38. DOI： 10.19455/j.mcgy.1992.04.007.

摘要

本文就制材生产中通常使用的三种下锯法,采用计算机进行模拟锯解,然后进行分析评价,找出三种下锯法对主产锯材宽度、原木出材率和经济效果的影响。为合理利用原木、选择适当的下锯法,提供了理论依据。

Abstract

Three sawing ways are usually used in sawmills. In this thesis the mimic sawing was carried out by a computer. Then the results was analysed and evaluated. It was found how to influence the width of the sawn timber, lumber recovery and economic effects. The theoretical basis is contributed for sawyers to reasonably utilized logs and choose the sawing method in the production process in sawmills.