卧式多层热压机机架热力耦合分析及结构改进设计

花军; 史士曼; 李晓旭; 李浩; 李涛; 郑旋

doi:10.12326/j.2096-9694.2022137

研究报告 | 浏览量 : 0 下载量: 10 CSCD: 0

PDF
导出
分享
收藏
专辑

卧式多层热压机机架热力耦合分析及结构改进设计
Thermal-Mechanical Coupling Analysis and Structural Improvement Design of Horizontal Multi-Layer Hot Press Frame
1.东北林业大学机电工程学院,黑龙江哈尔滨 150040
2.中国林业科学研究院木材工业研究所,北京 100091
3.山西秋林机械有限公司,山西晋中 030600
2023年37卷第2期页码：43-52
DOI： 10.12326/j.2096-9694.2022137

扫描看全文

花军,史士曼,李晓旭等.卧式多层热压机机架热力耦合分析及结构改进设计[J].木材科学与技术,2023,37(02):43-52.

HUA Jun,SHI Shiman,LI Xiaoxu,et al.Thermal-Mechanical Coupling Analysis and Structural Improvement Design of Horizontal Multi-Layer Hot Press Frame[J].Chinese Journal of Wood Science and Technology,2023,37(02):43-52.
花军,史士曼,李晓旭等.卧式多层热压机机架热力耦合分析及结构改进设计[J].木材科学与技术,2023,37(02):43-52. DOI： 10.12326/j.2096-9694.2022137.

HUA Jun,SHI Shiman,LI Xiaoxu,et al.Thermal-Mechanical Coupling Analysis and Structural Improvement Design of Horizontal Multi-Layer Hot Press Frame[J].Chinese Journal of Wood Science and Technology,2023,37(02):43-52. DOI： 10.12326/j.2096-9694.2022137.

摘要

卧式多层热压机较立式多层热压机在生产能力方面实现了新的突破，更适用于胶合板产业的发展。为研究热力耦合效应对卧式多层热压机机架力学性能的影响，以80层4′×8′卧式多层热压机为研究对象，根据胶合板热压工艺及卧式多层热压机的结构特点，确定闭合保压阶段机架的受载情况；利用有限元方法分别对力载荷和热力耦合效应作用下的机架状态进行分析。结果表明：在热力耦合效应作用下，机架的应力值和变形量显著增加，实际工况下机架不能满足卧式多层热压机闭合保压阶段所需要的强度和刚度要求。基于分析结果，对机架结构进行改进设计；经验证，改进后机架结构满足设计要求，为卧式多层热压机机架结构改进设计提供新的设计思路和手段，具有实际工程应用价值。

Abstract

Compared with the vertical multi-layer hot press, the horizontal multi-layer hot press has achieved a new breakthrough in production capacity and is more suitable for the development of plywood industry. This paper takes 80 layers of 4′×8′ horizontal multi-layer hot press as the research object and determines the load condition of the frame in the closed pressure maintaining stage based on the plywood hot pressing process and the structural characteristics of the horizontal multi-layer hot press in order to study the influence of thermal-mechanical coupling effect on the mechanical properties of the horizontal multi-layer hot press. To analyze the frame state under the influence of force load and thermal-mechanical coupling effect, finite element analysis methods is used. The results show that the stress and deformation of the frame increase significantly under the action of thermal-mechanical coupling effect, and the frame cannot meet the strength and stiffness requirements of the horizontal multi-layer hot press in the closed pressure maintaining stage under the actual working condition. The frame structure is improved based on the above analysis results, and it is verified that the improved frame structure meets the design requirements, which provides a new design idea and means for the improvement design of the horizontal multi-layer hot press frame structure, and has practical engineering application value.

关键词

卧式多层热压机机架有限元分析热力耦合分析改进设计

Keywords

horizontal multi-layer hot pressframefinite element analysesthermal-mechanical coupling analysisimprove design

references

张杰, 黄宗兴, 费国强, 等. 2800t木板热压机主框架应力分析及其结构优化[J]. 机电工程技术, 2015, 44(7): 137-140, 158.

ZHANG J, HUANG Z X, FEI G Q, et al. Stress analysis and structure optimization for the main frame of 2800t board hot-press machine[J]. Mechanical & Electrical Engineering Technology, 2015, 44(7): 137-140, 158.

王野平, 李晓国, 钱海宁. 基于ANSYS Workbench的多层热压机框架结构分析及优化[J]. 制造技术与机床, 2018(2): 77-81.

WANG Y P, LI X G, QIAN H N. Analysis and optimization of multilayer hot press frame structure based on ANSYS Workbench[J]. Manufacturing Technology & Machine Tool, 2018(2): 77-81.

陈光伟, 李艳娜, 花军, 等. 连续压机活动式机架变形与热力耦合特性研究[J]. 林产工业, 2020, 57(4): 14-18, 46.

CHEN G W, LI Y N, HUA J, et al. Study on the deformation and thermal mechanical coupling characteristics of the movable frame of the continuous press[J]. China Forest Products Industry, 2020, 57(4): 14-18, 46.

李振杰, 李东帅, 敖杰, 等. 桁架焊接机器人导轨梁的热力耦合变形规律的有限元分析[J]. 机床与液压, 2019, 47(16): 157-161.

LI Z J, LI D S, AO J, et al. Research on thermal mechanical coupling deformation law for guideway of truss welding robot[J]. Machine Tool & Hydraulics, 2019, 47(16): 157-161.

翟宇丽, 花军, 关晓平, 等. 基于绿色制造多层热压机机架结构优化的分析[J]. 木材加工机械, 2012, 23(6): 18-22, 40.

ZHAI Y L, HUA J, GUAN X P, et al. Optimization analysis of frame structure of based on green manufacturing multilayer hot-press[J]. Wood Processing Machinery, 2012, 23(6): 18-22, 40.

张涛, 李孟光. 封头无胎冷旋压机机架的有限元分析及优化设计[J]. 机械设计与制造, 2012(5): 62-64.

ZHANG T, LI M G. Optimized design and finite element analysis for frame of mouldless cold spinning Machine for vessel end closures[J]. Machinery Design & Manufacture, 2012(5): 62-64.

宋晓波, 胡水平, 林鹏飞. 中厚板轧机组合式机架的力学行为[J]. 塑性工程学报, 2011, 18(6): 41-46.

SONG X B, HU S P, LIN P F. Research on mechanical behavior of plate rolling-mill sectional housing[J]. Journal of Plasticity Engineering, 2011, 18(6): 41-46.

张新洲, 蒋清海, 武凯, 等. 压机框架有限元分析及试验验证[J]. 机械设计, 2012, 29(3): 11-15.

ZHANG X Z, JIANG Q H, WU K, et al. Finite element analysis and experimental verifications of press frame[J]. Journal of Machine Design, 2012, 29(3): 11-15.

王尚斌, 孙宇, 武凯. 压机框架有限元分析及结构优化[J]. 机械设计, 2011, 28(4): 79-84.

WANG S B, SUN Y, WU K. Finite element analysis and structural optimization of press frame[J]. Journal of Machine Design, 2011, 28(4): 79-84.

雷才奎, 陈小玉, 万会雄, 等. 碎石桩施工平台升降液压缸静强度及疲劳寿命的仿真分析[J]. 船舶工程, 2019, 41(4): 128-134.

LEI C K, CHEN X Y, WAN H X, et al. Simulation analysis on static strength and fatigue life of lifting hydraulic cylinder of gravel pile construction platform[J]. Ship Engineering, 2019, 41(4): 128-134.

王永岩, 杨蕾, 张克远, 等. 基于温度场的梳棉机锡林关键参数优化设计[J]. 上海纺织科技, 2016, 44(8): 57-59.

WANG Y Y, YANG L, ZHANG K Y, et al. Optimized design on key parameter of cylinder in carding machine based on temperature field[J]. Shanghai Textile Science & Technology, 2016, 44(8): 57-59.

庞圣桐, 曾东建, 汪建忠, 等. 温度试验与热力耦合仿真对活塞结构的优化[J]. 机械设计与制造, 2018(8): 166-169.

PANG S T, ZENG D J, WANG J Z, et al. Temperature test and thermo-mechanical coupling simulationto optimize structure of piston[J]. Machinery Design & Manufacture, 2018(8): 166-169.

文章被引用时，请邮件提醒。

提交

暂无数据