1.东北林业大学材料科学与工程学院，黑龙江哈尔滨 150040
扫 描 看 全 文
孙博,阚雨菲,高振华.HN-PAE树脂对大豆蛋白胶黏剂的共交联改性研究[J].木材科学与技术,2022,36(02):54-59.
SUN Bo,KAN Yu-fei,GAO Zhen-hua.Co-crosslinking of Soybean Adhesive Blending with Urea-Epoxy-Polyamidoamine Epichlorohydrin Resin[J].Chinese Journal of Wood Science and Technology,2022,36(02):54-59.
采用低成本、富含活性基团的无甲醛尿素-环氧树脂（代号为HN）为共交联改性剂，与交联剂聚酰胺多胺-环氧氯丙烷（PAE）树脂共混制备大豆蛋白胶。红外光谱（FTIR）表征与热重分析表明：HN树脂能与PAE树脂有效共交联，同时HN-PAE树脂能与大豆蛋白上的活性基团反应，提高大豆蛋白胶的热稳定性。通过胶合板性能测试对HN树脂用量和豆粉用量进行配方优化，将HN-PAE复合树脂溶液（HN树脂质量分数70%）稀释至质量分数为6%，豆粉相对用量为30%~35%时，制备的II类胶合板的胶合强度满足GB/T 9846—2015《普通胶合板》的要求。
A low-cost, formaldehyde-free, and reactive incremental modifier, the urea-epoxy resin(code name: HN), which was made from urea and epoxy monomer, was blended with the crosslinker polyamidoamine epichlorohydrin (PAE) resin to produce the soybean adhesive. FTIR and TGA analyses indicated that HN resin effectively co-crosslink with PAE resin. The blended HN-PAE resin react with active groups from the soybean protein, by which improved the thermal stability of the soybean adhesive. Based on the plywood property evaluation, the preferable content ratio of resin HN and soybean flour were optimized, when the HN-PAE resin(HN mass fraction was 70%) solution was diluted to 6%, and the relative dosage of soybean flour was 30%~35%, the bonding strength of Type II plywood made with the optimized soybean adhesive fully met the requirements of China National Standard GB/T 9846—2015",Plywood for general use,".
尿素-环氧树脂共交联改性大豆蛋白胶黏剂胶合性能
urea-epoxy resinco-crosslinkingsoybean adhesivebonding strength
庞艳芳, 徐伟涛, 李琪, 等. 生物基木材胶黏剂研究进展[J]. 林产工业, 2018, 45(4): 3-7.
PANG Y F, XU W T, LI Q, et al. Research progress of bio-based wood adhesives[J]. China Forest Products Industry, 2018, 45(4): 3-7.
王海杰, 李萌萌, 关二旗, 等. 大豆蛋白基人造板胶黏剂改性技术研究进展[J]. 木材工业, 2019, 33(2): 25-29.
WANG H J, LI M M, GUAN E Q, et al. Review on R & D of modification technologies of soybean protein adhesives for wood-based panels[J]. China Wood Industry, 2019, 33(2): 25-29.
阚雨菲, 阚浩峰, 姜也, 等. 尿素-乙二醛树脂的优化合成及其对大豆胶黏剂的改性[J]. 林业工程学报, 2020, 5(5):69-75.
KAN Y F, KAN H F, JIANG Y, et al. Optimal synthesis of urea-glyoxal resin and its crosslinking modification on soybean-based wood adhesive[J]. Journal of Forestry Engineering, 2020, 5(5): 69-75.
Vnučec D, Kutnar A, Goršek A. Soy-based adhesives for wood-bonding-a review[J]. Journal of Adhesion Science and Technology, 2017, 31(8): 910-931.
CHANG Z W, SUN Z X, WU W B, et al. Effects of inorganic filler on performance and cost effectiveness of a soybean-based adhesive[J]. Journal of Applied Polymer Science, 2020, 137(29): 48892.
LIU C, ZHANG Y, LI X N, et al. “Green” bio-thermoset resins derived from soy protein isolate and condensed tannins[J]. Industrial Crops and Products, 2017, 108: 363-370.
GUI C S, WANG G Y, WU D, et al. Synthesis of a bio-based polyamidoamine-epichlorohydrin resin and its application for soy-based adhesives[J]. International Journal of Adhesion and Adhesives, 2013, 44: 237-242.
LI J J, LUO J, LI X N, et al. Soybean meal-based wood adhesive enhanced by ethylene glycol diglycidyl ether and diethylenetriamine[J]. Industrial Crops and Products, 2015, 74: 613-618.
GAO D Q, FAN B, ZHANG B H, et al. Storage stability of polyamidoamine-epichlorohydrin resin and its effect on the properties of defatted soybean flour-based adhesives[J]. International Journal of Adhesion and Adhesives, 2019, 91: 92-101.
LUO J, LI X N, ZHANG H X, et al. Properties of a soybean meal-based plywood adhesive modified by a commercial epoxy resin[J]. International Journal of Adhesion and Adhesives, 2016, 71: 99-104.
MI Y, SUN Z X, GAO D Q, et al. Positive impact of carbohydrate on the crosslinking, performance, and potential applications of defatted soybean flour-based adhesive[J]. International Journal of Adhesion and Adhesives, 2021, DOI：10.1016/j.ijadhadh.2021.102811http://dx.doi.org/10.1016/j.ijadhadh.2021.102811.
ZHAO Y T, HE M, ZHAO L, et al. Epichlorohydrin-cross-linked hydroxyethyl cellulose/soy protein isolate composite films as biocompatible and biodegradable implants for tissue engineering[J]. ACS Applied Materials & Interfaces, 2016, 8(4): 2781-2795.
WANG Z, ZHAO S J, PANG H W, et al. Developing eco-friendly high-strength soy adhesives with improved ductility through multiphase core - shell hyperbranched polysiloxane[J]. ACS Sustainable Chemistry & Engineering, 2019, 7(8): 7784-7794.
京公网安备11010802024621
微信公众号