最新刊期

    期 0 , 2020
    • Yu Wenji Yan Haopeng Ye Kelin
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.001
      摘要:In this paper, distribution and activation of cured urea formaldehyde resins of recycled particles from waste particleboard were investigated by FT IR transmission spectroscopy. The results showed: the cured urea formaldehyde resins were mainly distributed in small sized particles, but little in large sized particles; the active groups still existed in the cured urea formaldehyde resins and might have contributions to the regluability of the recycled particleboard; the cured urea formaldehyde resins in recycled particles could reduce free formaldehyde emission from the remanufactured particleboard.  
      关键词:Infra red spectroscopy;Waste particleboard;Recyled particles   
      4
      |
      53
      |
      10
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353601 false
      发布时间:2021-03-12
    • Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.006
      摘要:紫外光固化涂料在木制品涂饰中的应用祖勃荪1前言辐射固化是一种快速发展的高新技术产业。从70年代至今,辐射固化技术在发达国家的应用越来越普及,以年平均10%以上的速度在增长,而且在今后若干年内,仍能保持这种增长势头。这一现象说明辐射固化技术具有巨大的发...  
        
      10
      |
      131
      |
      13
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353874 false
      发布时间:2021-03-12
    • Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.011
      摘要:浅谈提高中密度纤维板产品质量的方法与措施林守明ProductionManagementMeasuresforEnhancingtheQualityofMDFLinShouming(FuzhouWood-basedPanelFactory,Fuzhou...  
        
      4
      |
      36
      |
      1
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353619 false
      发布时间:2021-03-12
    • Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.012
      摘要:连续平压热压机(之四)欧阳琳4连续平压热压机技术参数3种热压机技术参数见下表:序号参数压机型号KüstersContirolHydro-Dyn1生产规模(m3/a)500001000001000002产品MDFMDFMDF3加热时间(s/mm)101...  
        
      3
      |
      182
      |
      8
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353630 false
      发布时间:2021-03-12
    • Wu Shengfu
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.010
      摘要:ply parquet is a kind of new and most competitive interior decorative material. This paper introduced charicteristics of the parquet, described the parquet production technology and addressed differences between conventional 3 layer parquet with side direction pre gluing of face layers before hot pressing and 5 layer parquet with face layers being pressed in high frequency heating press.  
        
      5
      |
      265
      |
      11
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353635 false
      发布时间:2021-03-12
    • Liu Xiuying Jiang Mingliang
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.002
      摘要:In this article, current situation of rubberwood resources, rubberwood processing and utilization technologies such as sawmilling,preservation and drying technology, rubberwood furniture manufacturing, rubberwood based panels manufacturing in China was reviewed briefly. Suggestions for further research and development of rubberwood processing and utilization were given.  
        
      4
      |
      122
      |
      8
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7354153 false
      发布时间:2021-03-12
    • Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.007
      摘要:我国胶合板工业发展的机遇和困难盛嘉廉曹志明OpportunityandThreatforDevolopmentofPlywoodIndustryinChinaShengJialianCaoZhiming随着国民经济的飞速发展,人民生活水平的不断提高,...  
        
      3
      |
      22
      |
      4
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353643 false
      发布时间:2021-03-12
    • Issue 5, (1997)
      摘要:二次加工新技术——一种新型贴面用胶粘剂目前市场上畅销一种将0.3~0.2mm厚刨切薄木贴在人造板基材上而成的贴面人造板,贴面用胶粘剂常用两种配方:一.脲醛树脂胶乳白胶面粉=453520二.脲醛树脂胶乳白胶=5050由于乳白胶价格昂贵,大大增加了贴面板...  
        
      2
      |
      18
      |
      0
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353652 false
      发布时间:2021-03-12
    • Issue 5, (1997)
      摘要:综合信息简讯首条国产刨花板生产线落户尼日利亚信阳木工机械厂出口到非洲的首条刨花板生产线自年初试产出第一块成板之后,经过进一步的改进和调试,已于5月在尼日利亚正式投产,并通过了投产验收。该生产线由香港港利有限公司投资兴建,年产刨花板达到15000m3。...  
        
      2
      |
      11
      |
      0
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353660 false
      发布时间:2021-03-12
    • Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.009
      摘要:The paper presented characteristics of wood/plastic fiber composites,raw materials used and requirement of the raw materials for making the composites. The paper also discussed the development trends of the composites in China etc. Market prospects of the composite were analyzed, too.  
      关键词:Wood/plastic fiber composites;Passenger car industry;Market prospect   
      3
      |
      117
      |
      17
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353662 false
      发布时间:2021-03-12
    • Chen Duan
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.003
      摘要:Chinese fir wood was dried under 105 ℃, then vacuum pressure impregnating treated respectively with PVA, MF, PVA MF resins, dried again under high temperature(105 ℃~150 ℃), and finally kept for 14 days under room temperature for testing. Hygroscopicity, coefficient of resin remained, coefficient of volume expansion, rate of weight gain and coefficient of dimension variation, chromatism and hardness of specimens were measured and calculated. The testing results showed that the modification effect of Chinese fir was the best among the experiment conditions when MF resin was used as impregnating agent and then dried under temperature of 105℃~110℃.  
      关键词:Chinese Fir;PVA;MF;impregnation;Modificationion   
      3
      |
      167
      |
      24
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353677 false
      发布时间:2021-03-12
    • Ding Zuolong Fei Benhua Liu Shengquan
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.005
      摘要:White rot fungi is one kind of main wood decay fungi. It secretes many kinds of enzymes, such as lignin degrading enzymes, cellulose degrading enzymes and hemicellulose degrading enzymes.The enzymes depolymerize wood cell substances including lignin, cellulose and hemicellulose, which are nutrients for the enzymes. Because of the depolymerization, chemical and physical properties of wood could be changed quite a lot by white rot fungi. In recent years, tremendous progress has been obtained in research field about fungi mutritions, transmitting way of enzymes, mechanism of enzyme degradation, effect on wood properties and molecular genetics of decay fungi.In the near future, it is hoped to restrict white rot decay through changing fungi gene with gene engineering.  
      关键词:White rot fungi;decay;lignin;Gene   
      5
      |
      262
      |
      40
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353698 false
      发布时间:2021-03-12
    • Wang Kai Fu Feng
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.004
      摘要:This paper revealed the current developing situations of wood processing technology from high efficiency utilization of wood resources, wood matrix composites, high tech application and environmental protection.  
      关键词:Wood processing;High efficiency utilization;Wood matrix composites;High technology;Environmental protection   
      5
      |
      295
      |
      36
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7353750 false
      发布时间:2021-03-12
    • John Lau
      Issue 5, (1997) DOI: 10.19455/j.mcgy.1997.05.008
      摘要:Business is full of the innovative technology. The way we do business yesterday, today and tomorrow are different. The final criteria is to enable customers to gain values from using our products. The strategy is to get the products to market faster than the competition. Therefore, the processing technology has to be flexible enough to cope with changing customers needs. In this article, the author has explained the necessity to use a technology which is most user friendly, flexibility and least set up time to enable maximum productivity.  
      关键词:Woodworking;Market;Information system;Maximum productivity   
      3
      |
      12
      |
      0
      <HTML>
      <L-PDF>
      <引用本文> <批量引用> 7354520 false
      发布时间:2021-03-12
    0