Influence of Hemp/Polypropylene Ratio and Density on the Properties of Wood-Plastic Composites

YOU Jia; QIU Hong-bo; ZHANG Ran; CHANG Liang

doi:10.19455/j.mcgy.20180503

Views : 0 下载量: 132 CSCD: 0

PDF
Export
Share
Collection
Album

Influence of Hemp/Polypropylene Ratio and Density on the Properties of Wood-Plastic Composites
1. Research Institute of Forest Resource Information Techniques,Chinese Academy of Forestry
2. Research Institute of Wood Industry
Vol. 32, Issue 5, Pages: 11-13(2018)
DOI： 10.19455/j.mcgy.20180503

扫描看全文

[1]由佳,仇洪波,张冉,常亮.工业大麻/聚丙烯纤维复合材料配比及密度对其性能的影响[J].木材工业,2018,32(05):11-13.

YOU Jia, QIU Hong-bo, ZHANG Ran, et al. Influence of Hemp/Polypropylene Ratio and Density on the Properties of Wood-Plastic Composites. [J]. China Wood Industry 32(5):11-13(2018)
[1]由佳,仇洪波,张冉,常亮.工业大麻/聚丙烯纤维复合材料配比及密度对其性能的影响[J].木材工业,2018,32(05):11-13. DOI： 10.19455/j.mcgy.20180503.

YOU Jia, QIU Hong-bo, ZHANG Ran, et al. Influence of Hemp/Polypropylene Ratio and Density on the Properties of Wood-Plastic Composites. [J]. China Wood Industry 32(5):11-13(2018) DOI： 10.19455/j.mcgy.20180503.

摘要

采用工业大麻纤维与聚丙烯（PP）纤维制备复合材料,考察密度、纤维配比对复合材料物理力学性能的影响。结果表明:随着密度的增加和大麻纤维用量的减少,复合材料的静曲强度增加,耐水性能改善;当密度为0.8 g/cm,3,大麻纤维与PP纤维配比为3∶7时,复合材料的力学性能满足DB 44/T 349-2006《木塑复合材料技术条件》中家具及装修用复合材料的力学性能要求,但耐水性能还有待进一步提高。

Abstract

A kind of wood-plastic composites（WPCs）was made from hemp fibers and polypropylene（PP）fibers.Effect of density and ratio of the hemp fibers to PP fibers on physical and mechanical properties of the WPCs samples were investigate.The results showed that increased mechanical properties and improved water resistance of the WPCs were observed with increasing WPCs density and reduced hemp fibers usage.The mechanical properties of the WPCs with 0.8 g/cm,3, in WPCs density and 3∶7 in ratio of the hemp fibers to PP fibers could meet requirement for furniture and decoration in standard DB 44/T 349-2006.Water proof performance of the WPCs needs to be further improved.

关键词

大麻纤维聚丙烯（PP）纤维复合材料密度配比物理力学性能

Keywords

hemp fiberpolypropylene fibercompositedensityratiophysical and mechanical properties

references

Alert me when the article has been cited

提交

Preliminary Study on Manufacture Technology of Particleboard from Soybean Stalk

Effects of Density and Moisture Content on Flexural Properties of Bamboo-Based Fiber Composites

Research Progress of Wood/Metal-Organic Frameworks Composites

Preparation of Melamine-Urea-Glyoxal (MUG) Resin and Properties of MUG Modified Poplar

Effect of Melamine-Urea-Glyoxal Resin on Physical and Mechanical Properties of Rubberwood

相关机构

College of Mechanical and Electrical Engineering,Northeast Forestry University

Research Institute of Forest Industry,Guangdong Academy of Forestry

Research Institute of Wood industry,Chinese Academy of Forestry

Research Institute of Wood Industry，Chinese Academy of Forestry

Beijing Forestry University Forest Science Co. Ltd

Address：Box 29，Research Institute of Wood Industry, No. 1, Dongxiaofu, Haidian District, Beijing Postal code：100091
Tel：010-62889419 Email：mckx@caf.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：16680

⁰