Scrap Melamine Impregnated Paper Powder as a Urea-Formaldehyde Resin Adhesive Filler for Plywood

QU Bao-xue1; ZHU Yan-zhong1; ZHOU Yu2; HAN Wen-lu3

doi:10.19455/j.mcgy.2013.01.015

Piactical Techniques | Views : 0 下载量: 151 CSCD: 3

PDF
Export
Share
Collection
Album

Scrap Melamine Impregnated Paper Powder as a Urea-Formaldehyde Resin Adhesive Filler for Plywood
1. Forestry College,Agricultural University of Hebei
2. Research Institute of Wood Industry,Chinese Academy of Forestry
Vol. 27, Issue 1, Pages: 47-49(2013)
DOI： 10.19455/j.mcgy.2013.01.015

扫描看全文

[1]曲保雪,祝彦忠,周宇,韩文路.废浸渍纸粉末用作胶合板脲醛树脂胶填料的研究[J].木材工业,2013,27(01):47-49.

QU Bao-xue1, ZHU Yan-zhong1, ZHOU Yu2, et al. Scrap Melamine Impregnated Paper Powder as a Urea-Formaldehyde Resin Adhesive Filler for Plywood. [J]. China Wood Industry 27(1):47-49(2013)
[1]曲保雪,祝彦忠,周宇,韩文路.废浸渍纸粉末用作胶合板脲醛树脂胶填料的研究[J].木材工业,2013,27(01):47-49. DOI： 10.19455/j.mcgy.2013.01.015.

QU Bao-xue1, ZHU Yan-zhong1, ZHOU Yu2, et al. Scrap Melamine Impregnated Paper Powder as a Urea-Formaldehyde Resin Adhesive Filler for Plywood. [J]. China Wood Industry 27(1):47-49(2013) DOI： 10.19455/j.mcgy.2013.01.015.

摘要

为降低脲醛树脂胶调胶成本,及有效利用三聚氰胺树脂浸渍纸废料,将浸渍纸边回收、粉碎,以替代工业面粉用作脲醛树脂胶填料,制备胶合板。结果表明:浸渍纸粉末用量为树脂质量的10%～15%时,试板的胶合强度最高;甲醛释放量随浸渍纸粉末比例的增加而降低。浸渍纸粉末作为胶合板用脲醛树脂胶的填料具有可行性。

Abstract

The authors recycled scrap melamine impregnated paper and then pulverized it to powders to be used as a urea formaldehyde（UF） resin adhesive filler for plywood production.Their goal was to reduce the cost of wood adhesive and to minimize pollution from combustion of the impregnated paper.The results showed that adding 10 to 15 percent of the powder,the plywood bonding strength was considerably improved.It was also determined that formaldehyde emission decreased as the impregnated paper powder was increased.

关键词

胶合板废浸渍纸粉末脲醛树脂填料胶合强度甲醛释放量

Keywords

plywoodscrap melamine impregnaed paper powderUF resinfillerbonding strengthformaldehyde emission

references

Alert me when the article has been cited

提交

Effect of Expanded Vermiculite Powder Used in Flame Retardant Resin in Plywood

Study on Corn Cob Modified by Calcium Carbonate Microcrystals and Its Preparation as Adhesive Filler for Urea-Formaldehyde Resin Adhesive

Performance of Phenol Formaldehyde Resin Partially Substituted with Larix gmelinii Bark Pyrolytic-Tar

Konjac Glucomannan/Chitosan Based Adhesive for Plywood Production

Thermal Characteristics of Modified Soy-based Protein Adhesive and its Optimized Processes for Manufacturing Poplar Plywood

相关机构

College of Forestry,South China Agriculture University

College of Materials Science and Engineering，Nanjing Forestry University

College of Material Science and Technology, Beijing Forestry University

Northwest A&F University,Yangling

Research Institute of Wood industry,Chinese Academy of Forestry

Address：Box 29，Research Institute of Wood Industry, No. 1, Dongxiaofu, Haidian District, Beijing Postal code：100091
Tel：010-62889419 Email：mckx@caf.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：16680

⁰