The Effects of Wood/Jute/Polypropylene Fiber Contents on the Properties of the Composite

GUO Wen-jing; FAN Liu-fen; CHEN Zheng-kun; WANG Zheng

doi:10.19455/j.mcgy.2007.03.003

Research & Development | Views : 0 下载量: 214 CSCD: 11

PDF
Export
Share
Collection
Album

The Effects of Wood/Jute/Polypropylene Fiber Contents on the Properties of the Composite
1. Key Lab of Wood Science and Technology of State Forestry Administration
2. Research Institute of Wood Industry,Chinese Academy of Forestry
Issue 3, Pages: 8-10(2007)
DOI： 10.19455/j.mcgy.2007.03.003

扫描看全文

[1]郭文静,范留芬,陈正坤,王正.木/麻/PP纤维含量对复合材料性能的影响[J].木材工业,2007(03):8-10.

GUO Wen-jing, FAN Liu-fen, CHEN Zheng-kun, et al. The Effects of Wood/Jute/Polypropylene Fiber Contents on the Properties of the Composite. [J]. China Wood Industry (3):8-10(2007)
[1]郭文静,范留芬,陈正坤,王正.木/麻/PP纤维含量对复合材料性能的影响[J].木材工业,2007(03):8-10. DOI： 10.19455/j.mcgy.2007.03.003.

GUO Wen-jing, FAN Liu-fen, CHEN Zheng-kun, et al. The Effects of Wood/Jute/Polypropylene Fiber Contents on the Properties of the Composite. [J]. China Wood Industry (3):8-10(2007) DOI： 10.19455/j.mcgy.2007.03.003.

摘要

采用无纺织气流成型织坯再热压的工艺,研究汽车内饰用木/麻/PP纤维三元复合材料中,3种纤维含量对复合材料性能的影响。研究结果表明,增加PP纤维含量,可以提高复合材料的静曲强度和耐水性;麻纤维含量增加对提高材料的强度影响显著,但耐水性略有下降。当PP纤维含量为40%、麻纤维为30%、木纤维30%时,复合材料的性能较佳。

Abstract

The effects of the different fiber contents on the properties of the Wood fiber/jute fiber/polypropylene fiber composite are discussed in this paper.The composites are formed with nonwoven air formed method in mats and are pressed in panels.The results indicate that the MOR and water resistance properties of the composites were improved by adding much more PP fibers.Increasing jute fiber can improve the MOR and MOE of the composites obviously,but the water resistance properties are decreased at the same time.The composite will get the best properties while it consists of 40% PP fiber,30% jute fiber and 30% wood fiber.

关键词

木纤维麻纤维聚丙烯（PP）纤维复合材料性能

Keywords

wood fiberjute fiberpolypropylene（PP）fibercompositeproperty

references

Alert me when the article has been cited

提交

Effect of Mass Ratio of Bamboo/Wood Fiber on Properties of Bamboo/Wood/Polypropylene Composites

Study on the Composite of Wood-synthetic Fiber

Research Progress of Wood/Metal-Organic Frameworks Composites

Synthesis of Glyoxal-urea（GU） Resin and Its Application in Rubberwood Modification

Effect of Manufacture Technology on Properties of Ultra-low Density Flame-Retardant Fiberboard Made with Isocyanate Resins

相关机构

Research Institute of Wood Industry,Chinese Academy of Forestry

Research Institute of Wood Industry，Chinese Academy of Forestry

College of Materials Science and Technology,BeiHua University

Research Institute of Wood industry,Chinese Academy of Forestry

Guangxi Fenglin Wood Industry Group Co.Ltd.

Address：Box 29，Research Institute of Wood Industry, No. 1, Dongxiaofu, Haidian District, Beijing Postal code：100091
Tel：010-62889419 Email：mckx@caf.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：16680

⁰