Using ET03 Auxiliary to Reduce Production Cost for E1-level MDF

YUN Tian-yi

doi:10.19455/j.mcgy.2005.06.011

Views : 0 下载量: 40 CSCD: 0

PDF
Export
Share
Collection
Album

Using ET03 Auxiliary to Reduce Production Cost for E1-level MDF
1. Hainan Yalong Wood Industry Limited Company
Issue 6, Pages: 35-36(2005)
DOI： 10.19455/j.mcgy.2005.06.011

扫描看全文

[1]云天翼.ET03助剂降低E1级中纤板生产成本的试验[J].木材工业,2005(06):38-39.

YUN Tian-yi. Using ET03 Auxiliary to Reduce Production Cost for E1-level MDF. [J]. China Wood Industry (6):35-36(2005)
[1]云天翼.ET03助剂降低E1级中纤板生产成本的试验[J].木材工业,2005(06):38-39. DOI： 10.19455/j.mcgy.2005.06.011.

YUN Tian-yi. Using ET03 Auxiliary to Reduce Production Cost for E1-level MDF. [J]. China Wood Industry (6):35-36(2005) DOI： 10.19455/j.mcgy.2005.06.011.

摘要

利用ET03助剂对UF树脂进行改性处理,并将改性前、后的UF树脂分别用于中密度纤维板生产。试验结果表明:改性后的UF树脂在降低10%施胶量的情况下,板材的物理力学性能指标、甲醛释放量仍可达到GB/T 1718—1999《中密度纤维板》E1级标准;每m3的中纤板可降低成本4%,5,%。

Abstract

A urea-formaldehyde resin for MDF manufacturing was modified with ET03 auxiliary.Results found that even when the resin consumption was reduced by 10% from the normal amount,the MDF bonded with the modified resin had excellent physical and mechanical properties,and its formaldehyde emission attained E1 level according to the national standard of GB/T 1718—1999,and thus,the production cost was reduced by 4%～5%.

关键词

中纤板助剂生产成本甲醛释放量

Keywords

MDFauxiliaryproduction costformaldehyde emission

references

Alert me when the article has been cited

提交

Study on Corn Cob Modified by Calcium Carbonate Microcrystals and Its Preparation as Adhesive Filler for Urea-Formaldehyde Resin Adhesive

Instruction of Principle Indexes of Chinese National Standard GB/T 24508 for Wood-Plastic Composite Flooring

Development of Radiant Heating Simulation Chamber

Comparison between 1 m³ Chamber Method and Desiccator Method for Detecting Formaldehyde Emissions from Wood Flooring Products

Effect of Test Conditions on Formaldehyde Emissions from Whole Wooden Furniture Using A Large Chamber

相关机构

College of Materials Science and Engineering，Nanjing Forestry University

Research Institute of Wood Industry，Chinese Academy of Forestry

Key Laboratory of Lumber of State Forestry Administration

Research Institute of Wood Science，Heilongjiang Academy of Forestry

Zhejiang Forestry Product Testing Station

Address：Box 29，Research Institute of Wood Industry, No. 1, Dongxiaofu, Haidian District, Beijing Postal code：100091
Tel：010-62889419 Email：mckx@caf.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：16680

⁰