Damage Detection for Timber Structure Joints Based on Piezoelectric Sensing Technology

Quan-jing ZHANG; Fang HAN; Tian-chi CHEN

doi:10.12326/j.2096-9694.2021023

RESEARCH PAPERS | Views : 0 下载量: 10 CSCD: 0

PDF
Export
Share
Collection
Album

Damage Detection for Timber Structure Joints Based on Piezoelectric Sensing Technology
1.College of Science,Wuhan University of Science and Technology,Wuhan 430081,Hubei
2.Hubei Province Key Laboratory of Systems Science in Metallurgical Process,Wuhan 430081,Hubei,China
Vol. 36, Issue 1, Pages: 63-67(2022)
DOI： 10.12326/j.2096-9694.2021023

扫描看全文

张全景,韩芳,陈天驰.基于压电传感技术的木结构连接节点损伤识别[J].木材科学与技术,2022,36(01):63-67.

ZHANG Quan-jing,HAN Fang,CHEN Tian-chi.Damage Detection for Timber Structure Joints Based on Piezoelectric Sensing Technology[J].Chinese Journal of Wood Science and Technology,2022,36(01):63-67.
张全景,韩芳,陈天驰.基于压电传感技术的木结构连接节点损伤识别[J].木材科学与技术,2022,36(01):63-67. DOI： 10.12326/j.2096-9694.2021023.

ZHANG Quan-jing,HAN Fang,CHEN Tian-chi.Damage Detection for Timber Structure Joints Based on Piezoelectric Sensing Technology[J].Chinese Journal of Wood Science and Technology,2022,36(01):63-67. DOI： 10.12326/j.2096-9694.2021023.

摘要

针对木结构中常见的榫卯连接与螺栓连接节点，利用压电传感技术对其进行健康工况和损伤工况的数值模拟研究，其中榫卯连接考虑榫头的平动、转动、缺损工况，螺栓连接考虑预紧力松动工况；对压电片所接收到的信号进行以小波包分解，并以各频段信号能量的总和作为能量指标，对不同损伤工况进行定量评估，最后以螺栓连接为例进行实验验证。数值计算和实验结果均表明，压电片所接收到的信号能量随损伤程度的不断增加而减小，利用压电传感技术可以有效识别不同类型连接节点处不同程度的损伤，该结论可为工程实际提供参考。

Abstract

The digital simulations for intact and failure conditions of common timber structure joints of tenon-mortise joints and bolted joints were conducted based on the piezoelectric sensing technology. Specifically, the horizontal movement, rotation, and defects of tenons were considered as the failure load cases for tenon-mortise joints, while the relaxation of pre-tightening force was considered as the failure load case for the bolted joints. Then the failure index, which is the sum of signal energy for different frequency bands decomposed based on wavelet packet analysis, was used to quantitatively evaluate the degree of damage severity. Finally, the experiment of bolted joints was implemented to verify the digitalsimulation results. Both of the digital and the experiment results indicate that the signal energy received by piezoelectric plates gradually decreases with the increase of damage severity. The piezoelectric sensing technology can efficiently detect the local damage at the timber joints, which provide a reference for the engineering practice.

关键词

压电传感技术木结构连接节点损伤识别小波包能量

Keywords

piezoelectric sensing technologytimber structure jointsdamage detectionwavelet packet energy

references

费本华, 刘雁. 木结构建筑学[M]. 北京: 中国林业出版社, 2011.

龚迎春, 娄万里, 李明月, 等. 我国木结构产业发展展望[J]. 木材工业, 2019, 33(5): 20-24.

GONG Y C, LOU W L, LI M Y, et al. Prospects for timber structure industry in China[J]. China Wood Industry, 2019, 33(5): 20-24.

徐佳鹤, 王超, 张斌. 我国古建筑木构件及木质文物保护技术发展历程与展望[J]. 木材工业, 2020, 34(6): 39-43,47.

XU J H, WANG C, ZHANG B. Review and prospect analysis of conservation techniques in heritage timber structures in China[J]. China Wood Industry, 2020, 34(6): 39-43,47.

张训亚, 姜笑梅, 殷亚方. 不同方向落叶松木材声-超声参数特征及其与密度关系研究[J]. 木材加工机械, 2017, 28(4): 24-28.

ZHANG X Y, JIANG X M, YIN Y F. Study on acousto-uctrasonic parameters of larch wood in different directions and its density relationship[J]. Wood Processing Machinery, 2017, 28(4): 24-28.

黄荣凤, 伍艳梅, 李华, 等. 古建筑旧木材腐朽状况皮罗钉检测结果的定量分析[J]. 林业科学, 2010, 46(10): 114-118.

HUANG R F, WU Y M, LI H, et al. Quantitative analysis of decaying detected by pilodyn in wood of ancient architecture[J]. Scientia Silvae Sinicae, 2010, 46(10): 114-118.

李华, 陈勇平, 黎冬青, 等. 古建筑木构件阻力仪检测中影响阻力值的因素探讨[J]. 木材加工机械, 2011, 22(2): 19-21,26.

LI H, CHEN Y P, LI D Q, et al. Influencing factors on the results of resistograph of wood components in historical building[J]. Wood Processing Machinery, 2011, 22(2): 19-21,26.

陈勇平, 李华, 黎冬青, 等. 古建筑木材中应力波传播速度的影响因素[J]. 木材工业, 2012, 26(2): 37-40.

CHEN Y P, LI H, LI D Q, et al. Effects on stress wave speed inside wood members in historical buildings[J]. China Wood Industry, 2012, 26(2): 37-40.

郭慧, 盛振湘, 王霄, 等. 基于机器视觉的刨花板表面缺陷检测系统[J]. 木材工业, 2019, 33(3): 18-22.

GUO H, SHENG Z X, WANG X, et al. A system based on machine vision for detecting surface defects of particleboard[J]. China Wood Industry, 2019, 33(3): 18-22.

黄泳水.基于压电陶瓷的木结构健康监测与损伤识别研究[D]. 荆州: 长江大学, 2019.

Zhang J C, Li Y, Huang Y S, et al. A feasibility study on timber moisture monitoring using piezoceramic transducer-enabled active sensing[J]. Sensors, 2018, 18(9): 3100.

刘孝禹, 饶玉龙, 张继承, 等. 基于压电传感器的木材轴压损伤监测[J]. 压电与声光, 2020, 42(5): 681-685.

LIU X Y, RAO Y L, ZHANG J C, et al. Timber axial pressure damage monitoring based on piezoceramic sensor[J]. Piezoelectrics & Acoustooptics, 2020, 42(5): 681-685.

刘晶波, 王振宇, 杜修力, 等. 波动问题中的三维时域粘弹性人工边界[J]. 工程力学, 2005, 22(6): 46-51.

LIU J B, WANG Z Y, DU X L, et al. Three-dimensional visco-elastic artificial boundaries in time domain for wave motion problems[J]. Engineering Mechanics, 2005, 22(6): 46-51.

李婷. 应力与材料构成对压电纵波在混凝土中的传输影响研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.

Alert me when the article has been cited

提交

暂无数据