Manufacturing Process and Properties of Chlorella Protein-Based Adhesive

CHEN KATE BOYI; BAI Ming-yang; GU Ji-you; GAN Wei-xing; LU Mei-lian; GAO Zhen-zhong

doi:10.12326/j.2096-9694.2020184

RESEARCH PAPERS | Views : 0 下载量: 12 CSCD: 0

PDF
Export
Share
Collection
Album

Manufacturing Process and Properties of Chlorella Protein-Based Adhesive
1.College of Materials and Energy，South China Agricultural University，Guangzhou 510642，Guangdong，China
2.College of Materials Science and Engineering，Northeast Forestry University，Harbin 150040，Heilongjiang，China
3.College of Resources Environment and Materials，Guangxi University，Nanning 530004，Guangxi，China
4.Guangxi Sanwei Forest Products Industry Co. LTD，Wuzhou 543001，Guangxi，China
Vol. 35, Issue 5, Pages: 24-30(2021)
DOI： 10.12326/j.2096-9694.2020184

扫描看全文

CHEN KATE BOYI,百明阳,顾继友等.小球藻蛋白基胶黏剂的制备及其胶合性能研究[J].木材科学与技术,2021,35(05):24-30.

BOYI CHEN KATE,BAI Ming-yang,GU Ji-you,et al.Manufacturing Process and Properties of Chlorella Protein-Based Adhesive[J].Chinese Journal of Wood Science and Technology,2021,35(05):24-30.
CHEN KATE BOYI,百明阳,顾继友等.小球藻蛋白基胶黏剂的制备及其胶合性能研究[J].木材科学与技术,2021,35(05):24-30. DOI： 10.12326/j.2096-9694.2020184.

BOYI CHEN KATE,BAI Ming-yang,GU Ji-you,et al.Manufacturing Process and Properties of Chlorella Protein-Based Adhesive[J].Chinese Journal of Wood Science and Technology,2021,35(05):24-30. DOI： 10.12326/j.2096-9694.2020184.

摘要

小球藻蛋白具有可再生、价格低廉等优点，可用于制备蛋白基胶黏剂。采用氢氧化钠（NaOH）、十二烷基硫酸钠（SDS）和三羟甲基丙烷三缩水甘油醚（TTE）改性处理小球藻蛋白后制备胶黏剂。多种方式表征结果显示，改性处理破坏了小球藻蛋白的球形结构，提供了更多的交联位点，从而提高了胶黏剂的胶合强度及耐水性能。在优化工艺参数：双面涂胶量400 g/m,2,，热压压力1.5 MPa、热压温度150 ℃、热压时间8 min的条件下，制备的三层桉木胶合板的干、湿胶合强度分别为1.78、1.11 MPa，满足GB/T 9846—2015《普通胶合板》中II类胶合板的要求。

Abstract

With the advantages of sustainability and low cost, chlorella protein was considered a suitable material to manufacture protein-based adhesives. In this paper, chlorella protein was modified by sodium hydroxide (NaOH), sodium dodecyl sulfate (SDS), and trimethylpropane triglycidyl ether (TTE), then made into adhesives. The testing results of the chlorella protein-based adhesives with various characterization methods showed that the modification destroyed the spherical structure of chlorella protein, and provided multiple cross-linking sites, thereby improving the bonding strength and the water resistance of the adhesive. Plywood samples were made with double-sided chlorella protein-based adhesive coating with a volume of 400 g/m,2, under the conditions of hot-pressing process parameters, which were the pressure of 1.5 MPa, the temperature of 150 ℃, and the hot-pressing time of 8 min, The dry and wet bonding strengths of the plywood samples were 1.78 MPa and 1.11 MPa, which met the requirements of class II plywood in GB/T 9846—2015 ",Plywood for general use,".

关键词

小球藻蛋白蛋白基胶黏剂胶合强度

Keywords

chlorella proteinprotein-based adhesivesbonding strength

references

吴蓁, 项瑜, 张立亭, 等. 水性木材胶粘剂的制备与性能研究[J]. 中国胶粘剂, 2012, 21(12): 45-48.

WU Z, XIANG Y, ZHANG L T, et al. Study on preparation and properties of aqueous wood adhesive[J]. China Adhesives, 2012, 21(12): 45-48.

张伟, 高强, 秦志勇, 等. 我国木材工业用胶黏剂研究与应用现状及发展趋势[J]. 中国人造板, 2014, 21(3): 8-12.

ZHANG W, GAO Q, QIN Z Y, et al. Research and development of wood adhesive in China[J]. China Wood-Based Panels, 2014, 21(3): 8-12.

高强, 刘峥, 李建章. 人造板用大豆蛋白胶黏剂研究进展[J]. 林业工程学报, 2020, 5(2): 1-11.

GAO Q, LIU Z, LI J Z. Research progress of soy protein adhesive for wood-based composites[J]. Journal of Forestry Engineering, 2020, 5(2): 1-11.

李锦. 耐水性豆粕胶黏剂的优化制备及表征研究[D]. 哈尔滨: 东北林业大学, 2019.

WANG Y, DENG L Y, FAN Y H. Preparation of soy-based adhesive enhanced by waterborne polyurethane: optimization by response surface methodology[J]. Advances in Materials Science and Engineering, 2018: 1-8.

Pradyawong S, Qi G Y, Li N B, et al. Adhesion properties of soy protein adhesives enhanced by biomass lignin[J]. International Journal of Adhesion and Adhesives, 2017, 75: 66-73.

时君友, 温明宇, 李翔宇, 等. 生物质基无甲醛胶黏剂的研究进展[J]. 林业工程学报, 2018, 3(2): 1-10.

SHI J Y, WEN M Y, LI X Y, et al. Research progress of biomass-based formaldehyde-free adhesives[J]. Journal of Forestry Engineering, 2018, 3(2): 1-10.

左迎峰, 屠茹茹, 吴义强, 等. 尿素-双醛淀粉-甲醛共缩聚树脂胶黏剂的制备与性能表征[J]. 材料导报, 2020, 34(8): 8172-8178.

ZUO Y F, TU R R, WU Y Q, et al. Preparation and characterization of urea-dialdehyde starch-formaldehyde copolycondensation resin adhesive[J]. Materials Reports, 2020, 34(8): 8172-8178.

雷洪, 杜官本. 生物质木材胶黏剂的研究进展[J]. 林业科技开发, 2012, 26(3): 7-11.

李舒野, 高振华, 王明媚, 等. 淀粉胶粘剂的化学改性与应用研究进展[J]. 中国胶粘剂, 2017, 26(8): 48-51, 59.

LI S Y, GAO Z H, WANG M M, et al. Research progress of starch adhesives in chemical modification and application[J]. China Adhesives, 2017, 26(8): 48-51, 59.

李国平. 蛋白核小球藻粉中氨基酸含量及饲用价值分析[J]. 中国野生植物资源, 2003, 22(2): 23-25.

LI G P. Content of amino acids in Chlorella pyrenoidosa and evaluation of its feeding value[J]. Chinese Wild Plant Resources, 2003, 22(2): 23-25.

Xu Y C, Xu Y T, Zhu W J, et al. Improve the performance of soy protein-based adhesives by a polyurethane elastomer[J]. Polymers, 2018, 10(9): 1016.

王海杰, 李萌萌, 关二旗, 等. 大豆蛋白基人造板胶黏剂改性技术研究进展[J]. 木材工业, 2019, 33(2):25-29.

WANG H J, LI M M, GUAN E Q, et al. Review on R & D of modification technologies of soybean protein adhesives for wood-based panels[J]. China Wood Industry, 2019, 33(2): 25-29.

张泽宇, 林玥彤, 王堡, 等. 改性大豆蛋白基胶黏剂的研究进展[J]. 包装工程, 2021, 42(5):100-110.

ZHANG Z Y, LIN Y T, WANG B, et al. Research progress of graft modified soy protein based adhesives[J]. Packaging Engineering, 2021, 42(5): 100-110.

Bandara N, Chen L Y, Wu J P. Adhesive properties of modified Triticale distillers grain proteins[J]. International Journal of Adhesion and Adhesives, 2013, 44: 122-129.

梅雪峰, 杨玉昆. 丙烯酸酯压敏胶粘剂的紫外光交联技术研究[J]. 粘接, 2000, 21(4): 4-6, 24.

MEI X F, YANG Y K. Study on UV-crosslinkable acrylic pressure sensitive adhesive[J]. Technology on Adhesion & Sealing, 2000, 21(4): 4-6, 24.

沈蓓英. SDS—聚丙烯酰胺凝胶电泳法测定大豆蛋白发泡粉分子量[J]. 中国油脂, 1987, 12(6): 22-27.

朱娴, 刘芹, 高小超, 等. 大豆蛋白胶粘剂的改性研究进展[J]. 中国胶粘剂, 2015, 24(6): 49-53.

ZHU X, LIU Q, GAO X C, et al. Modification research progress of soybean protein adhesives[J]. China Adhesives, 2015, 24(6): 49-53.

庞艳芳, 徐伟涛, 李琪, 等. 生物基木材胶黏剂研究进展[J]. 林产工业, 2018, 45(4): 3-7.

PANG Y F, XU W T, LI Q, et al. Research progress of bio-based wood adhesives[J]. China Forest Products Industry, 2018, 45(4): 3-7.

Li X N, Chen M S, Zhang J Z, et al. Physico-chemical properties of soybean meal-based adhesives reinforced by ethylene glycol diglycidyl ether and modified nanocrystalline cellulose[J]. Polymers, 2017, 9(12): 463.

SU J F, YUAN X Y, HUANG Z, et al. Physicochemical properties of soy protein isolate/carboxymethyl cellulose blend films crosslinked by Maillard reactions: Color, transparency and heat-sealing ability[J]. Materials Science and Engineering: C, 2012, 32(1): 40-46.

MEI X F, YANG Y K. Study on UV-crosslinkable acrylic pressure sensitive adhesive[J]. Technology on Adhesion & Sealing, 2000, 21(4): 4-6, 24.

Chen N , Lin Q , Rao J , et al. Water resistances and bonding strengths of soy-based adhesives containing different carbohydrates[J]. Industrial Crops & Products, 2013, 50:44-49.

Laemmli U K. Cleavage of structural proteins during the assembly of the head of bacteriophage T4[J]. Nature, 1970, 227(5259): 680-685.

Alert me when the article has been cited

提交

Study on Corn Cob Modified by Calcium Carbonate Microcrystals and Its Preparation as Adhesive Filler for Urea-Formaldehyde Resin Adhesive

Toughening and Low Temperature Rapid Curing Modification of Phenol Formaldehyde Resin

Cold-pressing Technology for Making Parquet Substrates with Built-in Electric Heating Elements

Influence of Adhesive Layer Temperature on Bonding Strength of Veneer/MDF Glued by Hot Melt Adhesives

Preparation and Performance of Lignin-Phenol-Formaldehyde Resin Catalyzed with Nanometer Magnesium Oxide