Study on Seismic Performance of Mortise-tenon Reinforcement Joints in Chuan-dou Style Timber Structure

Shuang-yong WANG; Ting GUO; Hao DENG; Hai-bin ZHOU

doi:10.12326/j.2096-9694.2020026

Research Papers | Views : 0 下载量: 12 CSCD: 0

PDF
Export
Share
Collection
Album

Study on Seismic Performance of Mortise-tenon Reinforcement Joints in Chuan-dou Style Timber Structure
1.Research Institute of Wood Industry，Chinese Academy of Forestry，Beijing 100091，China
2.School of Civil Engineering，Beijing Jiaotong University，Beijing 100044，China
Vol. 35, Issue 1, Pages: 36-41(2021)
DOI： 10.12326/j.2096-9694.2020026

扫描看全文

王双永,郭婷,邓昊等.穿斗式木结构榫卯节点加固的抗震性能研究[J].木材科学与技术,2021,35(01):36-41.

WANG Shuang-yong,GUO Ting,DENG Hao,et al.Study on Seismic Performance of Mortise-tenon Reinforcement Joints in Chuan-dou Style Timber Structure[J].Chinese Journal of Wood Science and Technology,2021,35(01):36-41.
王双永,郭婷,邓昊等.穿斗式木结构榫卯节点加固的抗震性能研究[J].木材科学与技术,2021,35(01):36-41. DOI： 10.12326/j.2096-9694.2020026.

WANG Shuang-yong,GUO Ting,DENG Hao,et al.Study on Seismic Performance of Mortise-tenon Reinforcement Joints in Chuan-dou Style Timber Structure[J].Chinese Journal of Wood Science and Technology,2021,35(01):36-41. DOI： 10.12326/j.2096-9694.2020026.

摘要

选取西南民居常见穿斗式木结构典型的直榫型边节点，采用穿木销和穿钢销加固方案，通过单调和低周往复加载足尺试验，对比加固方法对直榫边节点抗震性能的影响。结果表明：相比未加固节点，两种加固节点的破坏程度均有所降低，且有效抑制拔榫现象；穿木销和穿钢销加固节点的初始刚度分别提高了50%和75%，屈服弯矩分别提高了45%和73%，极限弯矩分别提高了27%和69%，耗能能力分别提高了200%和69%。两种方法均有效提高了穿斗式木结构直榫边节点的抗震性能。

Abstract

In this study, the straight tenon-type edge joint was selected, which was the common typical joint in chuan-dou style timber structure of southwestern residential buildings in China. The reinforcement schemes were adopted, which including wood-pin and steel-pin. And the influence of two reinforcement methods on the seismic resistance of straight joints was compared, through the monotonic loading and low-cycle reversed loading full-scale tests. The results showed that the damage degree of the two reinforced joints were reduced, and could effectively inhibit the tenon pulling occurrences, compared with the unreinforced joints. Using wood-pin and steel-pin reinforcement, the initial stiffness of the joints was increased by 50% and 75%, the yield bending moment was increased by 45% and 73%, the moment-resisting capacity was increased by 27% and 69%, and the dissipated energy was increased by 200% and 69%, respectively. In conclusion, both methods effectively improved the seismic performance of mortise-tenon joints in chuan-dou style timber structure.

关键词

穿斗式木结构直榫节点加固抗震性能

Keywords

Chuan-dou style timber structuremortise-tenon jointsreinforcementseismic performance

references

李佩. 穿斗式木结构榫卯连接抗震性能试验研究[D].重庆: 重庆大学, 2016.

胡旭. 黔东南地区传统民居穿斗式木结构力学性能与评估方法研究[D].广州: 华南理工大学, 2018.

谢启芳, 王龙, 郑培君, 等. 传统木结构单向直榫节点转动弯矩-转角关系理论分析[J].湖南大学学报（自然科学版）, 2017, 44(7): 111-117.

XIE Q F, WANG L, ZHENG P J, et al. Theoretical analysis on moment-rotation relationship of straightmortise-tenon joints for Chinese traditional wooden buildings[J].Journal of Hunan University(Natural Sciences), 2017, 44(7): 111-117.

薛建阳, 任国旗, 许丹, 等.传统民居穿斗式木结构栓榫节点抗震性能试验研究[J].建筑结构学报, 2019, 40(10): 158-167.

XUE J Y, REN G Q, XU D, et al. Experimental study on seismic performance of dowel joints in traditional Chuan-Dou style timber structures[J].Journal of Building Structures, 2019, 40(10): 158-167.

谢启芳, 郑培君, 向伟, 等.古建筑木结构直榫节点抗震性能试验研究[J].地震工程与工程振动, 2015, 35(3): 232-240.

XIE Q F, ZHENG P J, XIANG W, et al. Experimental study on seismic behavior of straight mortise-tenon joints of ancient timber buildings[J].Earthquake Engineering and Engineering Vibration, 2015, 35(3): 232-240.

DIN EN 12512-2005 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners [S].

范鹏. 钢筋混凝土十字截面柱抗震性能试验研究[D].天津: 天津大学, 2011.

建筑抗震试验规程, JGJ/T 101-2015[S].

Alert me when the article has been cited

提交

Study on Seismic Performance of Straight Tenon-type Joints in Chuan-dou Style Timber Structure

Review of Performance of Tenon-Mortise Joints between Column and Beam in Timber Structures