Effect of Size on Compressive Strength Parallel to the Grain of Cross-Laminated Timber Made with Domestic Larch

Ying-chun GONG; Qi YE; Guo-fang WU; Hai-qing REN; Cheng GUAN

doi:10.12326/j.2096-9694.2020019

Research Papers | Views : 0 下载量: 9 CSCD: 0

PDF
Export
Share
Collection
Album

Effect of Size on Compressive Strength Parallel to the Grain of Cross-Laminated Timber Made with Domestic Larch
1.Research Institute of Forestry New Technology，Chinese Academy of Forestry，Beijing 100091，China
2.The School of Technology，Beijing Forestry University，Beijing;100083，China
3.Research Institute of Wood Industry， Chinese Academy of Forestry，Beijing 100091，China
Vol. 35, Issue 1, Pages: 42-46(2021)
DOI： 10.12326/j.2096-9694.2020019

扫描看全文

龚迎春,叶琦,武国芳等.国产落叶松正交胶合木顺纹抗压强度尺寸效应[J].木材科学与技术,2021,35(01):42-46.

GONG Ying-chun,YE Qi,WU Guo-fang,et al.Effect of Size on Compressive Strength Parallel to the Grain of Cross-Laminated Timber Made with Domestic Larch[J].Chinese Journal of Wood Science and Technology,2021,35(01):42-46.
龚迎春,叶琦,武国芳等.国产落叶松正交胶合木顺纹抗压强度尺寸效应[J].木材科学与技术,2021,35(01):42-46. DOI： 10.12326/j.2096-9694.2020019.

GONG Ying-chun,YE Qi,WU Guo-fang,et al.Effect of Size on Compressive Strength Parallel to the Grain of Cross-Laminated Timber Made with Domestic Larch[J].Chinese Journal of Wood Science and Technology,2021,35(01):42-46. DOI： 10.12326/j.2096-9694.2020019.

摘要

基于GB/T 50329—2012《木结构试验方法标准》，测试国产落叶松正交胶合木（CLT）顺纹抗压强度，运用最弱链理论分析试件尺寸对CLT顺纹抗压强度的影响，并采用非参数统计法估计尺寸效应系数。研究结果表明：随着CLT试件长度或宽度的增加，其顺纹抗压强度下降。其中长度尺寸效应系数,S,L,与百分位数呈线性关系；宽度尺寸效应系数,S,W,为常数0.349；试件厚度变化对其顺纹抗压强度无显著影响。

Abstract

The compressive strength of cross-laminated timber made by Chinese larch was tested based on the standard of GB/T 50329—2012 on testing methods for timber structures. The weakest-link theory was used to analyze size effects of CLT 's compression strength parallel to the grain. The nonparametric statistics method was used to estimate the coefficient of the size effect. The result showed that the compression strength decreases with the increase of either the length or the width. And there is a significant linear relation between the coefficient of the length effect ,S,L,and different percentiles; the coefficient of the width effect ,S,W, was 0.349; there is no significant relation between the thickness and the compression strength parallel to the grain.

关键词

正交胶合木顺纹抗压强度尺寸效应

Keywords

cross-laminated timbercompression strength parallel to grainsize effect

references

龚迎春, 任海青. 正交胶合木的特性及发展前景[J].世界林业研究, 2016, 29(3): 71-74.

GONG Y C, REN H Q. Characteristics and development prospect of cross-laminated timber[J].World Forestry Research, 2016, 29(3): 71-74.

赵秀, 吕建雄, 江京辉等.结构用规格材抗弯强度的尺寸效应[J].建筑材料学报, 2014, 17(4): 734-737.

ZHAO X, LYU J X, JIANG J H, et al. Size effect of modulus of rupture for the Larch dimension lumber[J].Journal of Building Materials, 2014, 17(4): 734-737.

周海宾, 骆秀琴, 赵秀, 等. 落叶松目测等级规格材顺纹抗压强度尺寸效应[J].建筑材料学报, 2012, 15(3): 435-438.

ZHOU H B, LUO X Q, ZHAO X, et al. Effect of size on ultimate compression strength parallel to grain of visually-graded Chinese Larch dimension lumber [J].Journal of Building Materials, 2012, 15(3): 435-438.

Billy. Bohannan. Effect of size on bending strength of wood members[R].Madison: USDA Forest Service, 1966.

胡绪腾, 辛朋朋, 宋迎东. 基于最弱环理论的缺口件概率疲劳寿命预测方法[J].机械科学与技术, 2013, 32(2): 164-169.

HU X T, XIN P P, SONG Y D. Probabilistic fatigue life prediction method for notched specimens based on the Weakest-link theory[J].Mechanical Science and Technology for Aerospace Engineering, 2013, 32(2): 164-169.

滕冲, 汪同庆. SPSS统计分析[M].武昌: 武汉大学出版社, 2014: 82-85.

赵荣军, 王丽, 张俊珍, 等. 单板层积材顺纹抗拉与抗压强度的尺寸效应分析[J].木材工业, 2016, 30(3): 38-40, 48.

ZHAO R J, WANG L, ZHANG J Z, et al. Dimension effect on tension and compression strength of laminated veneer lumber[J].China Wood Industry, 2016, 30(3): 38-40, 48.

周海宾, 江京辉, 王学顺, 等. 兴安落叶松目测等级锯材抗拉强度的宽度尺寸效应[J].北京林业大学学报, 2012, 34(1): 127-130.

ZHOU H B, JIANG J H, WANG X S, et al. Size effects of width on tensile strength of visually-graded Chinese larch lumber[J].Journal of Beijing Forestry University, 2012, 34(1): 127-130.

Alert me when the article has been cited

提交

Evaluation of Bonding Shear Strength of Cross-Laminated Timber Fabricated with Domestic Larch

Evaluation Methods of Bending MOE of Cross-Laminated Timber Made from Domestic Japanese Larch Lumber

Lateral Slip Resistance and Ultimate Lateral Resistance of Metal-plate Connector