核桃楸和银杏人工林木材的机械加工性能评价

刘波; 谢雪霞; 孙华林; 姜笑梅; 殷亚方

doi:10.19455/j.mcgy.2016.04.002

研究与开发 | 浏览量 : 0 下载量: 83 CSCD: 6

PDF
导出
分享
收藏
专辑

核桃楸和银杏人工林木材的机械加工性能评价
Evaluation of Wood Machining Properties for Juglans mandshurica and Ginkgo biloba Wood from Planted Forests in China
1. 中国林科院木材工业研究所
2016年30卷第4期页码：9-12
DOI： 10.19455/j.mcgy.2016.04.002

扫描看全文

[1]刘波,谢雪霞,孙华林,姜笑梅,殷亚方.核桃楸和银杏人工林木材的机械加工性能评价[J].木材工业,2016,30(04):9-12.

LIU Bo, XIE Xue-xia, SUN Hua-lin, et al. Evaluation of Wood Machining Properties for Juglans mandshurica and Ginkgo biloba Wood from Planted Forests in China[J]. China Wood Industry, 2016,30(4):9-12.
[1]刘波,谢雪霞,孙华林,姜笑梅,殷亚方.核桃楸和银杏人工林木材的机械加工性能评价[J].木材工业,2016,30(04):9-12. DOI： 10.19455/j.mcgy.2016.04.002.

LIU Bo, XIE Xue-xia, SUN Hua-lin, et al. Evaluation of Wood Machining Properties for Juglans mandshurica and Ginkgo biloba Wood from Planted Forests in China[J]. China Wood Industry, 2016,30(4):9-12. DOI： 10.19455/j.mcgy.2016.04.002.

摘要

为实现珍贵树种核桃楸和非常用树种银杏的高附加值利用,依据LY/T 2054-2012《锯材机械加工性能评价方法》,分别测试了这2种人工林木材的机械加工性能。结果表明:银杏人工林木材的砂削、铣削和车削加工性能优秀,刨削、钻削和开榫性能良好;核桃楸人工林木材的车削性能优秀,铣削和开榫性能良好,其他性能一般。银杏人工林木材综合机械加工性能优于核桃楸人工林木材。

Abstract

To realize high value-added utilization of valuable hardwood species, Juglans mandshurica and less-commercially used softwood species Ginkgo biloba, wood machining properties of the two species from planted forests were evaluated, respectively, according to forestry industrial standard LY/T2054-2012. The results showed that sanding, shaping and turning performance of Ginkgo biloba were excellent with good planning, boring and mortising performance. Planning, shaping and mortising of Juglans mandshurica were excellent with other general machining performance. The comprehensive machining properties of Ginkgo biloba were better than that of Juglans mandshurica.