厚单板制备木质复合板材的工艺、关键设备和性能

余养伦; 孟凡丹; 于文吉

doi:10.19455/j.mcgy.2016.01.008

讨论与建议 | 浏览量 : 0 下载量: 154 CSCD: 4

PDF
导出
分享
收藏
专辑

厚单板制备木质复合板材的工艺、关键设备和性能
Manufacturing Technology, Key Equipment and Performance of Wood-based Composites Made from Thick Veneers
1. 中国林科院林业新技术研究所
2. 中国林科院木材工业研究所
3. 国家林业局木材科学与技术重点实验室
2016年30卷第1期页码：31-34
DOI： 10.19455/j.mcgy.2016.01.008

扫描看全文

[1]余养伦,孟凡丹,于文吉.厚单板制备木质复合板材的工艺、关键设备和性能[J].木材工业,2016,30(01):31-34.

YU Yang-lun, MENG Fan-dan, YU Wen-ji. Manufacturing Technology, Key Equipment and Performance of Wood-based Composites Made from Thick Veneers[J]. China Wood Industry, 2016,30(1):31-34.
[1]余养伦,孟凡丹,于文吉.厚单板制备木质复合板材的工艺、关键设备和性能[J].木材工业,2016,30(01):31-34. DOI： 10.19455/j.mcgy.2016.01.008.

YU Yang-lun, MENG Fan-dan, YU Wen-ji. Manufacturing Technology, Key Equipment and Performance of Wood-based Composites Made from Thick Veneers[J]. China Wood Industry, 2016,30(1):31-34. DOI： 10.19455/j.mcgy.2016.01.008.

摘要

针对木材单板化利用受限于单板厚度的难题,提出采用4,1,0 mm厚度单板制备木质复合板材的技术方案,介绍厚单板旋切、展平和干燥等关键工序的技术和设备特点,以及采用厚单板制备胶合板、单板层积材和竹木复合板材等3种木质复合板材的制备工艺和主要性能,为厚单板的产业化利用提供技术支撑。

Abstract

The authors developed a manufacturing technology and equipment to make 4 ,10 mm thick veneers. The key techniques included veneer peeling, tendering and drying were described. The properties of plywood, laminated veneer lumber and wood-bamboo composite made of the thick veneer were presented. The novel manufacturing technology may provide a new solution for making use of thick veneer.