中密度纤维板的实色UV辊涂工艺分析

滕雨; 江应; 曹平祥

doi:10.19455/j.mcgy.2015.03.010

讨论与建议 | 浏览量 : 0 下载量: 84 CSCD: 1

PDF
导出
分享
收藏
专辑

中密度纤维板的实色UV辊涂工艺分析
Roller Coating Process of Pigmented UV Lacquer for Medium Density Fiberboard
1. 南京林业大学材料科学与工程学院
2015年29卷第3期页码：39-42
DOI： 10.19455/j.mcgy.2015.03.010

扫描看全文

[1]滕雨,江应,曹平祥.中密度纤维板的实色UV辊涂工艺分析[J].木材工业,2015,29(03):39-42.

TENG Yu, JIANG Ying, CAO Ping-xiang. Roller Coating Process of Pigmented UV Lacquer for Medium Density Fiberboard[J]. China Wood Industry, 2015,29(3):39-42.
[1]滕雨,江应,曹平祥.中密度纤维板的实色UV辊涂工艺分析[J].木材工业,2015,29(03):39-42. DOI： 10.19455/j.mcgy.2015.03.010.

TENG Yu, JIANG Ying, CAO Ping-xiang. Roller Coating Process of Pigmented UV Lacquer for Medium Density Fiberboard[J]. China Wood Industry, 2015,29(3):39-42. DOI： 10.19455/j.mcgy.2015.03.010.

摘要

对中密度纤维板实色UV辊涂生产工艺及设备配置进行分析,提出中密度纤维板实色UV辊涂适宜工艺为两道腻子填充、三道底漆及两道面漆共七道涂布工序。经验证试验,涂饰板材的漆膜性能优良。

Abstract

This paper presents a roller coating process of pigmented UV lacquer for medium density fiberboard.This coating process has seven steps including two layers of filler coating,three layers of base coating and two layers of top coating.These coatings provide a fine protective film.