树皮含量对纤维热磨机能耗与纤维质量的影响

贾娜; 刘冰; 花军; 林晓亮

doi:10.19455/j.mcgy.2015.03.009

讨论与建议 | 浏览量 : 0 下载量: 99 CSCD: 3

PDF
导出
分享
收藏
专辑

树皮含量对纤维热磨机能耗与纤维质量的影响
Effects of Bark Proportion on Defibrator Energy Consumption and Fiber Quality
1. 东北林业大学
2015年29卷第3期页码：35-38
DOI： 10.19455/j.mcgy.2015.03.009

扫描看全文

[1]贾娜,刘冰,花军,林晓亮.树皮含量对纤维热磨机能耗与纤维质量的影响[J].木材工业,2015,29(03):35-38.

JIA Na, LIU Bing, HUA Jun, et al. Effects of Bark Proportion on Defibrator Energy Consumption and Fiber Quality[J]. China Wood Industry, 2015,29(3):35-38.
[1]贾娜,刘冰,花军,林晓亮.树皮含量对纤维热磨机能耗与纤维质量的影响[J].木材工业,2015,29(03):35-38. DOI： 10.19455/j.mcgy.2015.03.009.

JIA Na, LIU Bing, HUA Jun, et al. Effects of Bark Proportion on Defibrator Energy Consumption and Fiber Quality[J]. China Wood Industry, 2015,29(3):35-38. DOI： 10.19455/j.mcgy.2015.03.009.

摘要

对以杨木为主的纤维热磨试验数据进行统计,分析树皮含量与纤维热磨机能耗、纤维质量之间的关系。结果表明,树皮含量对热磨机能耗与纤维质量产生较大影响,热磨机能耗随着树皮杨木比（简称"皮木比"）的降低而减小,纤维筛分值随皮木比的增加呈现先升后降的趋势;对包装基材和地板基材用纤维板,允许的树皮含量分别为16%和14%,既保证产品质量,又降低原料成本。

Abstract

The authors analyzed the relationship among bark content,defibrator energy consumption and fiber quality based on statistical data obtained from a fiberboard production line.The results showed that defibrator energy consumption decreased and classification value increased at the beginning and then decreased as the ratio of bark to poplar decreased.For the fiberboard used for packaging and flooring,reasonable percentage of bark content was 16%and 14%,respectively,which ensured low production cost and higher fiber quality.