桦木、柞木小径材刨切薄板热压干燥的研究

赵小矛; 张帝树

doi:10.19455/j.mcgy.1998.02.003

浏览量 : 0 下载量: 82 CSCD: 7

PDF
导出
分享
收藏
专辑

桦木、柞木小径材刨切薄板热压干燥的研究
A Study on Platen dried Sliced Veneers from Small diameter Logs of Birch and Oak
1. 北京林业大学
1998年第2期
DOI： 10.19455/j.mcgy.1998.02.003

扫描看全文

[1]赵小矛,张帝树.桦木、柞木小径材刨切薄板热压干燥的研究[J].木材工业,1998(02):9-12.

Zhao Xiaomao Zhang Dishu. A Study on Platen dried Sliced Veneers from Small diameter Logs of Birch and Oak[J]. China Wood Industry, 1998,(2).
[1]赵小矛,张帝树.桦木、柞木小径材刨切薄板热压干燥的研究[J].木材工业,1998(02):9-12. DOI： 10.19455/j.mcgy.1998.02.003.

Zhao Xiaomao Zhang Dishu. A Study on Platen dried Sliced Veneers from Small diameter Logs of Birch and Oak[J]. China Wood Industry, 1998,(2). DOI： 10.19455/j.mcgy.1998.02.003.

摘要

对桦木、柞木两树种小径材刨切薄板（２１３ｍｍ×７０ｍｍ×４ｍｍ）热压干燥工艺的研究，着重探讨了：（１）热压干燥对桦木、柞木小径材刨切薄板翘曲度的影响；（２）热压干燥工艺参数及其交互作用与板片终含水率及厚度压缩率的关系，建立多元线性回归方程；（３）通过电镜分析，确定桦木、柞木小径材刨切薄板的优化干燥工艺条件。

Abstract

The paper discussed three aspects of platen drying sliced veneers from small diameter logs of two species( Betula platyphylla,Quercus mongolica ):(1)the influence of platen drying upon the warp of the veneers;(2)the relation between platen drying parameters(include their interactions)and final MC as well as thickness losses of the experimental materials,and a regression equations were established;(3)the platen drying parameters of the veneers were optimized according to testing microcosmic structure of the veneers via scanning electron microscope.

关键词

小径材刨切薄板热压干燥

Keywords

Small diameter logsSliced veneerPlaten drying

references

文章被引用时，请邮件提醒。

提交

阔叶树小径材热压干燥工艺的研究