杉木的PVA、MF真空加压浸渍改性试验

陈端

doi:10.19455/j.mcgy.1997.05.003

浏览量 : 0 下载量: 167 CSCD: 24

PDF
导出
分享
收藏
专辑

杉木的PVA、MF真空加压浸渍改性试验
Chinese Fir Wood Modification with PVA & MF Vacuum pressure Impregnating Treatment
1. 林业科学研究所
1997年第5期
DOI： 10.19455/j.mcgy.1997.05.003

扫描看全文

[1]陈端.杉木的PVA、MF真空加压浸渍改性试验[J].木材工业,1997(05):8-12.

Chen Duan. Chinese Fir Wood Modification with PVA & MF Vacuum pressure Impregnating Treatment[J]. China Wood Industry, 1997,(5).
[1]陈端.杉木的PVA、MF真空加压浸渍改性试验[J].木材工业,1997(05):8-12. DOI： 10.19455/j.mcgy.1997.05.003.

Chen Duan. Chinese Fir Wood Modification with PVA & MF Vacuum pressure Impregnating Treatment[J]. China Wood Industry, 1997,(5). DOI： 10.19455/j.mcgy.1997.05.003.

摘要

杉木经１０５℃干燥后，分别用ＰＶＡ、ＰＶＡ＋ＭＦ、ＭＦ真空加压浸渍，再用高温（１０５℃～１５０℃）干燥，最后经１４天恒温恒湿处理，测定并计算木材吸湿率、树脂留存率、体积膨胀率、增重率与尺寸变化率、色差和硬度。经分析后认为：本试验以ＭＦ浸渍后用１０５℃～１１０℃处理，杉木的改性效果较好。

Abstract

Chinese fir wood was dried under 105 ℃, then vacuum pressure impregnating treated respectively with PVA, MF, PVA MF resins, dried again under high temperature(105 ℃～150 ℃), and finally kept for 14 days under room temperature for testing. Hygroscopicity, coefficient of resin remained, coefficient of volume expansion, rate of weight gain and coefficient of dimension variation, chromatism and hardness of specimens were measured and calculated. The testing results showed that the modification effect of Chinese fir was the best among the experiment conditions when MF resin was used as impregnating agent and then dried under temperature of 105℃～110℃.