豆秸刨花板工艺的初步研究

周月

doi:10.19455/j.mcgy.1997.04.004

浏览量 : 0 下载量: 36 CSCD: 6

PDF
导出
分享
收藏
专辑

豆秸刨花板工艺的初步研究
Preliminary Study on Manufacture Technology of Particleboard from Soybean Stalk
1. 中国林科院木材工业研究所
1997年第4期
DOI： 10.19455/j.mcgy.1997.04.004

扫描看全文

[1]周月.豆秸刨花板工艺的初步研究[J].木材工业,1997(04):14-16.

Zhou Yue. Preliminary Study on Manufacture Technology of Particleboard from Soybean Stalk[J]. China Wood Industry, 1997,(4).
[1]周月.豆秸刨花板工艺的初步研究[J].木材工业,1997(04):14-16. DOI： 10.19455/j.mcgy.1997.04.004.

Zhou Yue. Preliminary Study on Manufacture Technology of Particleboard from Soybean Stalk[J]. China Wood Industry, 1997,(4). DOI： 10.19455/j.mcgy.1997.04.004.

摘要

本文分析了整株豆秸的化学成分，研究了用豆秸制造刨花板的工艺，并分析了不同工艺条件对刨花板性能的影响。结果表明：豆秸制造的刨花板，其物理力学性能和外观均达到国家标准要求，可以认为豆秸是制造刨花板适用的原料。

Abstract

In this paper, chemical composition of soybean stalk was analyzed first and the effects of soybean stalk particleboard manufacture technology on physical and mechanical properties of the board were studied. The results showed that the appearance as well as physical and mechanical properties of the board could meet the requirement of relevant national standard. It was approved that soybean stalk is a suitable material for making particleboard.