酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究

濮安彬; 陆仁书; 沈耀文

doi:10.19455/j.mcgy.1996.01.002

浏览量 : 0 下载量: 68 CSCD: 15

PDF
导出
分享
收藏
专辑

酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究
Sudy on Manufacturing Techniqu and Acc6lerated Ageing Behavior of Phenolic Resin-bonded Flaxboard
1. 东北林业大学
1996年第1期
DOI： 10.19455/j.mcgy.1996.01.002

扫描看全文

[1]濮安彬,陆仁书,沈耀文.酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究[J].木材工业,1996(01):6-10+21.

Sudy on Manufacturing Techniqu and Acc6lerated Ageing Behavior of Phenolic Resin-bonded Flaxboard[J]. China Wood Industry, 1996,(1).
[1]濮安彬,陆仁书,沈耀文.酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究[J].木材工业,1996(01):6-10+21. DOI： 10.19455/j.mcgy.1996.01.002.

Sudy on Manufacturing Techniqu and Acc6lerated Ageing Behavior of Phenolic Resin-bonded Flaxboard[J]. China Wood Industry, 1996,(1). DOI： 10.19455/j.mcgy.1996.01.002.

摘要

本文主要研究酚醛胶亚麻屑刨花板的生产工艺及其耐加速老化性能。研究中采用正交设计安排试验，并对试验结果进行方差分析，最后通过综合分析，得出酚醛胶亚麻屑刨花板的生产工艺和利用该工艺生产的板的耐加速老化性能结果。研究结果表明：密度为０．７５ｇ／ｃｍ３的酚醛胶亚麻屑刨花板性能不仅达到了德国室外用建筑刨花板标准ＤＩＮ６８７６３Ｖ１００型的要求，而且按美国ＡＳＴＭＤ１０３７加速老化标准检验，其静曲强度老化剩余率超过５０％。

Abstract

This study mainly focused on manufacturing technique and accelerated ageingproperties of phenolic resin-bonded flaxboard.Orthogonal design and variance analysis wereused.Through comprehensive analysis,board manufacturing technique and test results ofaccelerated ageing properties of the board were obtained.The results showed:when densityof the board is 0.75g/cm3,board’s properties can meet the German Standard DIN 68763V100 and surplus ratio of this board’s MOR is more than 50%according to ASTM D 1037(6-cycle accelerated ageing standard).

关键词

酚醛胶亚麻屑刨花板生产工艺耐老化性能

Keywords

Phenolic resin adliesiveFlaxboardManufacturing techniqueAccelerated age-ing properties

references

文章被引用时，请邮件提醒。

提交

异氰酸酯胶芦苇刨花板生产工艺研究