基于有限元分析的一体式台球杆力学性能评价

邵凯青; 沈华杰; 朱代根; 张凤武

doi:10.12326/j.2096-9694.2024032

研究报告 | 浏览量 : 0 下载量: 0 CSCD: 0 CNKI被引量: 0 Crossref: 0 Wos: 0 Scopus: 0 更多指标

PDF
导出
分享
收藏
专辑

基于有限元分析的一体式台球杆力学性能评价
Evaluation of Mechanical Properties of Integrated Billiard Cue Based on Finite Element Analysis
1.西南林业大学机械与交通学院,云南昆明 650224
2.福建理工大学设计学院,福建福州 350118
3.三明学院机电工程学院,福建三明 365001
2024年38卷第4期页码：20-27
纸质出版日期： 2024-07-30 ，
DOI： 10.12326/j.2096-9694.2024032
稿件说明：

移动端阅览

邵凯青,沈华杰,朱代根等.基于有限元分析的一体式台球杆力学性能评价[J].木材科学与技术,2024,38(04):20-27.

SHAO Kaiqing,SHEN Huajie,ZHU Daigen,et al.Evaluation of Mechanical Properties of Integrated Billiard Cue Based on Finite Element Analysis[J].Chinese Journal of Wood Science and Technology,2024,38(04):20-27.
邵凯青,沈华杰,朱代根等.基于有限元分析的一体式台球杆力学性能评价[J].木材科学与技术,2024,38(04):20-27. DOI： 10.12326/j.2096-9694.2024032.

SHAO Kaiqing,SHEN Huajie,ZHU Daigen,et al.Evaluation of Mechanical Properties of Integrated Billiard Cue Based on Finite Element Analysis[J].Chinese Journal of Wood Science and Technology,2024,38(04):20-27. DOI： 10.12326/j.2096-9694.2024032.

摘要

为探究台球杆杆体材料的选择依据，采用有限元分析法评价不同树种木材制作的台球杆杆体的力学性能。杆体材料选取白蜡木（

Fraxinus chinensis

）、榉木（

Zelkova schneideriana

）、槲栎（

Quercus aliena

）、槭木（

Acer mono

）、降香黄檀（

Dalbergia odorifera

）和核桃木（

Juglans regia

）等6种木材，借助ANSYS Workbench仿真呈现台球杆击球时碰撞情况，分析不同材料台球杆的力学性能：通过对比不同台球杆击球后台球获得的速度值大小，判断杆体传力性能优劣，并根据台球杆在击球过程中承受的最大应力值判断其强度性能。结果表明：6种材料的台球杆中，白蜡木台球杆的传力性能最佳，而降香黄檀台球杆的传力性能最差，台球杆的传力性能与木材密度、

、E

、μ

呈现负相关，与

、G

和

均呈正相关，6种

台球杆都具有足够的强度保证在击球时台球杆不发生破坏。

Abstract

To explore the basis for material selection of the shaft in billiard cues

this study employs the finite element analysis method to analyze the mechanical properties of billiard cue shafts made from different wood species. There are six materials selected including: Ash (

Fraxinus chinensis

)

Beech (

Zelkova schneideriana

)

Oriental White Oak (

Quercus aliena

)

Maple (

Acer mono

)

Dalbergia odorifera (

Dalbergia odorifera

)

and Walnut (

Juglans regia

). With the aid of ANSYS Workbench simulation to present the collision situation when the billiard cue strikes the ball

the mechanical properties of billiard cues made of different materials are analyzed. By comparing the speed values obtained by the billiard balls after being struck by different billiard cues

the superiority and inferiority of the force transmission performance of the shafts are determined

and the strength performance is evaluated based on the maximum stress endured by the billiard cues during the striking process. The results show that for the force transmission performance of the billiard cues

the Ash cue can exert the best force transmission performance

while the Dalbergia odorifera cue has the worst force transmission performance. The force transmission performance is negatively correlated with density

and

but positively correlated with

and

. All six billiard cues have sufficient strength to ensure that the billiard cues will not be damaged when striking the ball.

关键词

台球杆力学性能有限元分析

Keywords

billiard cuemechanical propertiesfinite element analysis

references

SMITH M. PickPocket: a computer billiards shark[J]. Artificial Intelligence, 2007, 171(16/17): 1069-1091.

ALCIATORE D G. The illustrated principles of pool and billiards[M]. Dr. Dave Billiards Resources，2004.

罗云涛. 台球运动球杆分类及杆法技巧探索[J]. 体育科技, 2016, 37(1): 30-31.

LUO Y T. The clubs classification and pole techniques of billiards[J]. Sport Science and Technology, 2016, 37(1): 30-31.

SHIMAMURA S, SUGA K, EZAWA Y, et al. Effects of material properties of cue on impact behaviour in follow and draw shots in billiards[J]. Sports Engineering, 2007, 10(4): 221-228.

SHIMAMURA S, SUGA K, EZAWA Y, et al. Effects of material properties of cue on ball trajectory in billiards[J]. Journal of Solid Mechanics and Materials Engineering, 2009, 3(7): 978-989.

YIN Q Y, HU L L, CHEN L, et al. Objective evaluation on performance of billiard cue in hitting ball[J]. International Journal of Impact Engineering, 2021, 158: 104020.

赵晓光. 台球杆皮头对杆法控制的影响分析[J]. 辽宁体育科技, 2014, 36(6): 95-97.

ZHAO X G. An analysis on the influence of the pool cue tip to rod method control[J]. Liaoning Sport Science and Technology, 2014, 36(6): 95-97.

成俊卿, 杨家驹, 刘鹏. 中国木材志[M]. 北京: 中国林业出版社, 1992: 94-693.

李坚, 刘一星, 赵广杰. 木材学[M]. 2版. 北京: 中国林业出版社, 2012: 207-209.

SURANA I, BEDI H S, BHINDER J, et al. Compression and fracture behavior of leather particulate reinforced polymer composites[J]. Materials Research Express, 2020, 7(5): 054006.

李德昌. 大学台球教程[M]. 北京: 北京大学出版社, 2011: 175-193.

哈尔滨工业大学理论力学教研室. 理论力学.1[M]. 9版. 北京: 高等教育出版社, 2023.

SHIMAMURA S, SUGA K, EZAWA Y, et al. Numerical evaluation of impact characteristics of cue in billiards [J]. Transactions of the Japan Society of Mechanical Engineers C, 2007, 73(729): 1480-1485.

谢一荣, 徐滕岗, 朱建军. 基于ANSYS Workbench的发动机连杆优化设计[J]. 东华大学学报(自然科学版), 2015, 41(4): 527-531.

XIE Y R, XU T G, ZHU J J. Optimization design of engine connecting rod based on ANSYS workbench[J]. Journal of Donghua University (Natural Science), 2015, 41(4): 527-531.

SOKOLOV D, RAY N, UNTEREINER L, et al. Hexahedral-dominant meshing[J]. ACM Transactions on Graphics, 2016, 35(5): 1-23.

SUN L, TIERNEY C M, ARMSTRONG C G, et al. Decomposing complex thin-walled CAD models for hexahedral-dominant meshing[J]. Computer-Aided Design, 2018, 103: 118-131.

ELEK L, KOVÁCS Z, CSÓKA L, et al. Evaluation of the effect of optimal fit criteria on the compressive strength of open mortise and tenon corner joints[J]. Holz als Roh-und Werkstoff, 2020, 78(2): 351-363.

张晓晴. 材料力学[M]. 北京: 机械工业出版社, 2021: 347.

GB 50005—2017，木结构设计标准[S].

陈潘, 张凤亮, 欧阳金友. 燕尾榫梁柱节点有限元分析及弯矩-转角关系研究[J]. 木材科学与技术, 2023, 37(6): 68-76.

CHEN P, ZHANG F L, OUYANG J Y. Finite element analysis and moment-rotation relationship of dovetail beam-column joints[J]. Chinese Journal of Wood Science and Technology, 2023, 37(6): 68-76.

LIU D, DAI C L, YU C G, et al. Numerical simulation and experimental study on single point blasting of ice jam of Heilongjiang River based on ANSYS/LSDYNA[J]. Water, 2022, 14(18): 2808.

文章被引用时，请邮件提醒。

提交

密度对稻壳/聚氯乙烯发泡复合材料尺寸稳定性及力学性能的影响

木塑空心柱轴压力学性能试验与有限元分析

燕尾榫梁柱节点有限元分析及弯矩-转角关系研究

热可逆性共价交联木塑复合材料的制备及力学性能

异氰酸酯胶黏剂在桉木刨花板中的渗透及界面力学性能