浏览全部资源
扫码关注微信
1.聊城大学建筑工程学院,山东聊城 252000
2.天水师范学院土木工程学院,甘肃天水 741001
3.西安建筑科技大学土木工程学院,陕西西安 710055
纸质出版日期： 2024-03-30 ，
扫 描 看 全 文
孟昭博,高飞飞,王鑫等.基于应变模态曲率差的木梁损伤识别[J].木材科学与技术,2024,38(02):36-42.
MENG Zhaobo,GAO Feifei,WANG Xin,et al.Damage Identification of Wooden Beams Based on Strain Modal Curvature Differences[J].Chinese Journal of Wood Science and Technology,2024,38(02):36-42.
为了识别木梁截面的残缺，提出基于应变模态曲率差的木梁损伤识别方法。首先，采用ABAQUS建立完好木梁和不同程度损伤木梁的有限元模型并进行模态分析；然后，分别采用应变模态和应变模态曲率差的损伤识别指标对木梁进行损伤定位识别，通过拟合应变模态曲率差与损伤程度的关系式估算木梁的损伤程度；最后，通过木梁试验验证该指标的有效性。结果表明：应变模态损伤识别指标对木梁的截面损伤定位效果较差；应变模态曲率差指标具有较强敏感性，能够准确地识别出木梁损伤位置和程度。
This paper presents a damage identification approach based on the difference in curvature of strain modes to identify the defects of the cross-section of wooden beams. First
modal analysis was performed to establish the finite element models of both intact and damaged wooden beams using ABAQUS. Next
the damage identification indicators of strain mode and strain mode curvature difference were used to locate and identify the damage of the wooden beams
and the damage degree of the wooden beams was estimated by fitting the relationship between strain mode curvature difference and damage degree. Lastly
the wooden beams test was used to confirm the validity of the indexes. The results reveal that: the strain mode damage identification index is unsatisfactory for damage localization of wooden beams; the strain mode curvature difference index has strong sensitivity and can properly identify different damage and degrees locations of wooden beams.
木梁应变模态曲率差损伤识别
wooden beamsstrain modal curvature differencedamage identification
安仁兵, 游文龙, 潘毅, 等. 泸县6.0级地震文化遗产震害调查与分析[J]. 土木工程学报, 2022, 55(12): 13-24.
AN R B, YOU W L, PAN Y, et al. Seismic damage investigation and analysis of cultural heritages in Ms 6.0 Luxian earthquake[J]. China Civil Engineering Journal, 2022, 55(12): 13-24.
刘宏超, 邬樱, 李爱群, 等. 古建筑木构件开裂修复加固技术分析及展望[J]. 工业建筑, 2023, 53(9): 29-44.
LIU H C, WU Y, LI A Q, et al. Analysis and prospect of restoration and reinforcement techniques for cracked wood components of ancient buildings[J]. Industrial Construction, 2023, 53(9): 29-44.
CHINKA S S B, PUTTI S R, ADAVI B K. Modal testing and evaluation of cracks on cantilever beam using mode shape curvatures and natural frequencies[J]. Structures, 2021, 32: 1386-1397.
吴帅, 张开银, 王道恒. 梁式结构损伤模式识别研究[J]. 武汉理工大学学报(交通科学与工程版), 2020, 44(3): 547-552.
WU S, ZHANG K Y, WANG D H. Research on damage pattern recognition of beam structure[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2020, 44(3): 547-552.
徐华东, 王立海, 胡志栋. 运用曲率模态技术的木梁损伤定量识别[J]. 振动、测试与诊断, 2011, 31(1): 110-114, 132-133.
XU H D, WANG L H, HU Z D. Quantitative identification of wood beam damage using modal curvature theory[J]. Journal of Vibration, Measurement & Diagnosis, 2011, 31(1): 110-114, 132-133.
谢启芳, 张保壮, 朱俊龙, 等. 木梁基于曲率模态技术的损伤识别[J]. 建筑结构, 2021, 51(18): 125-131.
XIE Q F, ZHANG B Z, ZHU J L, et al. Damage recognition of timber beam based on curvature modal technology[J]. Building Structure, 2021, 51(18): 125-131.
任现才, 孟昭博, 王鑫. 基于模态参数的简支木梁损伤识别研究[J]. 江苏建筑职业技术学院学报, 2022, 22(2): 5-9.
REN X C, MENG Z B, WANG X. Research on damage identification of simply supported wooden beam based on modal parameters[J]. Journal of Jiangsu Vocational Institute of Architectural Technology, 2022, 22(2): 5-9.
WANG T, CELIK O, CATBAS F N. Damage detection of a bridge model based on operational dynamic strain measurements[J]. Advances in Structural Engineering, 2016, 19(9): 1379-1389.
张则荣, 李鹏飞, 韩桐桐, 等. 基于应变模态的风机塔筒法兰螺栓断裂损伤监测研究[J]. 机电工程, 2021, 38(10): 1348-1354.
ZHANG Z R, LI P F, HAN T T, et al. Fracture damage monitoring of wind turbine tower flange bolt based on strain mode analysis[J]. Journal of Mechanical & Electrical Engineering, 2021, 38(10): 1348-1354.
李鹏飞, 张则荣, 张威, 等. 基于应变模态的风机塔筒根部疲劳裂纹损伤检测研究[J]. 噪声与振动控制, 2023, 43(2): 127-131, 146.
LI P F, ZHANG Z R, ZHANG W, et al. Study on damage detection of fatigue cracks at the root of the wind turbine tower based on strain mode[J]. Noise and Vibration Control, 2023, 43(2): 127-131, 146.
李灵杰, 韩晶, 李栋. 基于应变模态差的悬臂梁结构裂纹检测[J]. 科学技术与工程, 2018, 18(6): 81-86.
LI L J, HAN J, LI D. Crack detection for the cantilever beam based on the difference of the strain mode[J]. Science Technology and Engineering, 2018, 18(6): 81-86.
张豪, 史富强. 基于应变模态差的连续梁损伤识别方法研究与应用[J]. 浙江工业大学学报, 2019, 47(3): 280-285.
ZHANG H, SHI F Q. Research on damage identification method of continuous beams based on strain mode difference and application[J]. Journal of Zhejiang University of Technology, 2019, 47(3): 280-285.
张丹富, 马骐, 卫小龙, 等. 利用应变模态差识别弯管内部损伤[J]. 科学技术与工程, 2021, 21(8): 3097-3103.
ZHANG D F, MA Q, WEI X L, et al. Internal damage identification of elbow pipe by strain modal difference[J]. Science Technology and Engineering, 2021, 21(8): 3097-3103.
MENG Z B, REN X C, CHAI S Q, et al. Wood beam damage identification based on the curvature mode and wavelet transform[J]. Advances in Civil Engineering, 2023(1): 1-18.
高飞飞, 孟昭博. 基于应变模态参数的木梁损伤识别研究[J]. 低温建筑技术, 2023, 45(1): 73-77.
GAO F F, MENG Z B. Study of wood beam damage identification based on strain modal parameters[J]. Low Temperature Architecture Technology, 2023, 45(1): 73-77.
ŞIMŞEK M, KOCATÜRK T. Free and forced vibration of a functionally graded beam subjected to a concentrated moving harmonic load[J]. Composite Structures, 2009, 90(4): 465-473.
李德葆, 陆秋海.实验模态分析及其应用[M].北京：科学出版社, 2001.
吴加权. 基于多模态参数融合的钢筋混凝土梁损伤识别研究[D]. 昆明: 昆明理工大学, 2019.
GB/T 1927.4—2021, 无疵小试样木材物理力学性质试验方法 第4部分: 含水率测定[S].
GB/T 1927.5—2021, 无疵小试样木材物理力学性质试验方法 第5部分: 密度测定[S].
GB/T1927.11—2022, 无疵小试样木材物理力学性质试验方法 第11部分: 顺纹抗压强度测定[S].
GB/T1927.12—2021, 无疵小试样木材物理力学性质试验方法 第12部分: 横纹抗压强度测定[S].
GB/T 15777—2017, 木材顺纹抗压弹性模量测定方法[S].
殷志祥, 许宗敏. 基于应变模态差的索桁架-索网结构损伤识别[J]. 建筑结构, 2016, 46(7): 99-103.
YIN Z X, XU Z M. Damage identification of cable truss-cable net structure based on strain mode difference[J]. Building Structure, 2016, 46(7): 99-103.
相关文章
相关作者
相关机构
京公网安备11010802024621
微信公众号